1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP
   where <path> is the drive and directory created in step 2

   Follow the on-screen instructions.

5. To silent install, run with the /k switch from the command prompt.  For example, enter:

   <path>\SETUP /k
   where <path> is the drive and directory created in step 2

6. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

SOFTPAQ NUMBER:  SP17562
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Evo and Armada Rage Mobility Driver for Microsoft Windows 98 and Windows 95
VERSION:  8.00 Rev. A3 (ATI Version 5.00.2195.5026)
Language: TW Simplified Chinese  

CATEGORY:  Display

DIVISIONS:  Portables

PRODUCTS AFFECTED:  Compaq Evo N400c
		    Compaq Armada E700 Series
		    Compaq Armada E500 Series
		    Compaq Armada M700 Series

OPERATING SYSTEM:  Microsoft Windows 98
		   Microsoft Windows 95

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  Microsoft DirectX 7.0 or later

EFFECTIVE DATE:  October 22, 2001

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  5.0

SUPERSEDES:  SP16729

DESCRIPTION:  This is the Windows 98 video driver for Rage Mobility 
graphics chips in the Evo and Armada Series and models 
listed above.  It enables the features and functions of these 
graphics chips.  

Enhancements/Fixes:  
- DirectX 8.0 Support

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP
   where <path> is the drive and directory created in step 2

   Follow the on-screen instructions.

5. To silent install, run with the /k switch from the command prompt.  For example, enter:

   <path>\SETUP /k
   where <path> is the drive and directory created in step 2

6. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

Copyright 2001, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.