PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP17491

SP17491 — ICH2 Version Checker

SoftPaq Number SP17491
Filename sp17491.exe
Size 327K
Date May 02, 2001
Version 1.00 Rev A
Operating System Windows 98
Products Affected Compaq Deskpro ENC, Deskpro ENL, Deskpro EN SFF, Deskpro Workstation DW300, iPAQ NOTE: This utility has been developed for the products listed above, however it can be used on any product to determine if there is an ICH2 present.

  Download sp17491.exe  


Readme

SOFTPAQ NUMBER:  SP17491
PART NUMBER:  N/A
FILE NAME:  ICHREV.EXE
TITLE:  ICH2 Version Checker 
VERSION:  1.00 Rev A
LANGUAGE:  US

CATEGORY:  Software Solutions

DIVISIONS:  Desktops

PRODUCTS AFFECTED: Compaq Deskpro ENC, Deskpro ENL, Deskpro EN SFF, 
                   Deskpro Workstation DW300, iPAQ

             NOTE: This utility has been developed for the products listed above,
                   however it can be used on any product to determine if there is 
                   an ICH2 present.

OPERATING SYSTEM:  Microsoft Windows 98 (bootable diskette)

SYSTEM CONFIGURATION:  Requires diskette drive

PREREQUISITES:  N/A

EFFECTIVE DATE:  May 02, 2001

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.0

SUPERSEDES:  N/A

DESCRIPTION:  This creates a bootable diskette containing a utility that scans the PCI 
buses to detect the ICH2 stepping.  The stepping of the ICH2 and the bus, device and function 
details are displayed on the screen.  The utility identifies the B0, B1,B2,B4 and xB0 stepping.  

HOW TO USE:

1. Download the SoftPaq to a temporary, empty directory on your 
hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. A blank 
formatted 1.44MB diskette is required to create the bootable diskette. 

3. After the files have been unpacked, you may delete the self-extracting file 
downloaded in step 1.

4. To run the utility, insert the newly created diskette in the FDD and boot the
unit.  The utility will load and will scan all PCI buses, devices and functions
for the presence of the ICH2.  If the ICH2 is detected the ICH2 stepping and PCI
bus, device and function information will be displayed on the screen.  If the ICH2 
device is not detected then a screen prompt is displayed that indicates this.


Copyright 2001, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home