SOFTPAQ NUMBER: SP17307
PART NUMBER: 224068-009
FILE NAME: N/A
TITLE: ROMPaq for Deskpro Workstation 300 and Deskpro EXS (686P5 ROM)
VERSION: 1.12  
LANGUAGE: English (US)

CATEGORY: ROMPaqs and System Software

DIVISIONS: Workstations, Commercial Desktops

PRODUCTS AFFECTED: 
     Deskpro EXS: P1.5GHz/850,P1.4GHz/850
     Deskpro Workstation 300: All Models

OPERATING SYSTEM: Microsoft Windows Millennium Edition (Me)
                  Microsoft Windows 2000
                  Microsoft Windows 98
                  Microsoft Windows 95
                  Microsoft Windows for Workgroups 3.11
                  Microsoft Windows 3.1
                  Microsoft Windows NT 4.0
                  Microsoft Windows NT 3.51
                  Microsoft Windows NT 3.1
                  Microsoft MS-DOS
                  ROMPaqs and System Software

SYSTEM CONFIGURATION: N/A

PREREQUISITES: N/A

EFFECTIVE DATE: June 6, 2001

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SOFTPAQ UTILITY VERSION: 5.0       

SUPERSEDES: SP16062

DESCRIPTION:
This SoftPaq creates a ROMPaq firmware diskette that can be used to locally 
restore or upgrade the System ROM in the below models.  A backup of the current 
System ROM will be copied onto the ROMPaq diskette during the flash process.

The ROM Family and ROM date can be determined by running the Setup Utility by 
pressing F10 on the target computer during system power on of the computer, and 
viewing File/System Information.  This information can be saved into a text 
file by selecting File/Save to Diskette.

ENHANCEMENTS/FIXES:
 - Corrects an issue that affects system wake-up through COM1.
 - Corrects an issue where the system would not go into Suspend to RAM mode (S3) 
   with Windows Millennium if a Universal Serial Bus (USB) device is present.
 - Corrects a rare issue after intensive memory operations where the system
   may not restart if restart is attempted immediately after a power down.

HOW TO USE:

1.  Obtain a formatted 1.44-MB diskette and place it in your A: drive.

2.  Download the SoftPaq to a directory on your hard drive and change to that 
directory.  The file that is downloaded is an executable with a filename based 
on the SoftPaq Number above.

3.  From that drive and directory, execute the downloaded file and follow the 
on-screen instructions to build the ROMPaq diskette.

4.  After the diskette has been created, you may delete the SoftPaq file 
downloaded in step 2.

5.   Place the newly created diskette in the A: drive of the computer to be 
upgraded or restored and cycle system power to boot from the ROMPaq diskette.

6.  Follow the on-screen instructions to select the v1.12 Compaq System ROM and 
flash the firmware.

WARNING:  DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING THE 
UPGRADE PROCESS!!!


Copyright 2001, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.