SOFTPAQ NUMBER:  SP17172
PART NUMBER:  227863-291, 227864-291, 227865-291, 227866-291, 227867-291,
              227868-291, 227869-291, 227870-291   
FILE NAME:  NSSD
TITLE:	Japanese Novell Support Software Diskette (NSSD)
VERSION:  6.20 Rev A
LANGUAGE:   Japanese

CATEGORY:  Drivers

DIVISIONS:  Systems

PRODUCTS AFFECTED:  Compaq Server products

OPERATING SYSTEM:  intraNetWare (Japanese)
                   intraNetWare SMP (Japanese)
                   NetWare 4.2 (Japanese)
                   NetWare SFT-III  (Japanese)
                   NetWare 5.x (Japanese) 

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  April 06, 2001

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP15575

DESCRIPTION:  This SoftPaq is for Japanese products, and cannot be run 
in United States mode.  It creates eight diskettes.
The NSSD diskettes contain NetWare and intraNetWare drivers, NetWare 
Loadable Modules (NLMs), and support information to optimize the 
performance of NetWare and IntranetWare on Compaq servers.  
This software enhances the performance of Compaq options such as Compaq 
Drive Array controllers, Compaq 32-Bit SCSI-2 controllers, and Compaq 
CD-ROM drives.

Enhancements/Fixes in Version 6.20 Rev A:

This release of the Support Software for Novell Products (NSSD) primarily
supports the following new products:

   - Compaq ProLiant DL760 PCI-X Refresh

The following Compaq drivers were updated:

CPQARRAY.HAM Version 2.09 - NSSD 6.20
- Added Compaq Universal Hot Plug Tape support on the Compaq Integrated
  Smart Array.

CPQEIMD.NLM Version 1.00 - NSSD 6.20
- Initial release of Compaq Enhanced IMD Idle Screen Utility for NetWare.

CPQFC.HAM Version 2.50 - NSSD 6.20
- Added Fabric support for the RA4000 and RA4100.
- Added support for cascading of Loop Switches to a Brocade switch.
- Added support for SecurePath.

CPQHLTH.NLM Version 4.34 - NSSD 6.20
- Added support for Compaq ProLiant DL760 PCI-X Refresh.
- Added support for systems with SMBIOS configuration in ROM.
- Added support for the NetWare Enhanced IMD Idle Screen Utility,
  CPQEIMD.NLM.

CPQIML.NLM Version 1.10 - NSSD 6.20
- Updated driver to properly read product name from SMBIOS when found.

CPQONLIN.NLM Version 2.51 - NSSD 6.20
- Added Compaq Universal Hot Plug Tape support on the Compaq Integrated
  Smart Array.

CPQRAID.HAM Version 1.06 - NSSD 6.20
- Added support for:  
   * Advanced Data Guarding for the Smart Array 5300 Controller.   
   * Compaq Universal Hot Plug Tape.

CPQSBD.NLM Version 3.03 - NSSD 6.20
- Added support for PCI-X hot plug operations.

CPQSHD.CDM Version 1.37	- NSSD 6.20
- Added Compaq Universal Hot Plug Tape support for both CPQARRAY.HAM and
  CPQRAID.HAM.

Your suggestions and feedback are welcome at [email protected].


HOW TO USE

1. Obtain eight (8) formatted 1.44 MB diskettes.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3.  From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskettes in a drive to create the diskettes.

4.  After the diskettes have been created, you may delete the  
SoftPaq file downloaded in step 2.

5. For installation instructions, refer to READ1ST.RDM and WHATSNEW.RDM 
on the created diskettes.

Copyright 2001, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies.