| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP16782 — Presario Firmware Upgrade for Phillips CDRW CDD-4801
| SoftPaq Number |
SP16782 |
| Filename |
sp16782.exe |
| Size |
1083K |
| Date |
February 21, 2001 |
| Version |
2.0 |
| Operating System |
Windows 98, Windows Me |
| Products Affected |
Any Presario desktop with a Phillips CDRW CDD-4801 (HW Rev 03 only) NOTE: To determine whether this Phillips CDRW drive is installed, perform these steps: - Click Start in the lower left corner of the display. - Click Settings, then Control Panel to open the Control Panel dialog. - Double-click Compaq Diagnostics. - From the Compaq Diagnostics dialog, determine the CDRW drive information. |
Readme
SOFTPAQ NUMBER: SP16782
PART NUMBER: N/A
FILE NAME: SP16782.EXE
TITLE: Presario Firmware Upgrade for Phillips CDRW CDD-4801
VERSION: 2.0
LANGUAGE: US English
CATEGORY: ROMPaqs
DIVISIONS: Consumer
PRODUCTS AFFECTED: Any Presario desktop with a Phillips CDRW CDD-4801 (HW Rev 03 only)
NOTE: To determine whether this Phillips CDRW drive is installed, perform these steps:
- Click Start in the lower left corner of the display.
- Click Settings, then Control Panel to open the Control Panel dialog.
- Double-click Compaq Diagnostics.
- From the Compaq Diagnostics dialog, determine the CDRW drive information.
OPERATING SYSTEM: Microsoft Windows 98,
Microsoft Windows Millennium Edition (Me)
SYSTEM CONFIGURATION: N/A
EFFECTIVE DATE: February 21, 2001
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 5.x
SUPERSEDES: N/A
DESCRIPTION: This SoftPaq creates a bootable diskette that is used in Presario desktop
models identified above in PRODUCTS AFFECTED to upgrade the firmware for the Phillips
CDRW drive, model CDD-4801 (HW Rev 03), to Revision C2.0.
Enhancements/Fixes:
- Improves performance of the CDRW drive by allowing a recording speed of 8-speed.
The previous version (1.3) would only record on 2-speed.
- Implements a Dynamic Media Table. A self-learning algorithm has been added
that allows the drive to check new media by itself and add them to its
Dynamic Media Table.
HOW TO USE:
1. Download the SoftPaq into a temporary directory on your local drive.
2. Put a blank formatted diskette in the A: drive.
3. Execute the downloaded executable file (SP16782.EXE).
4. Follow the instructions on the screen. It will extract the files onto
the diskette as well as into the current directory, and will also make
the diskette bootable.
5. With the diskette still in Drive A, restart the computer, allowing it to boot
from the diskette. The CDRW firmware will be updated automatically.
6. After the update is completed, remove the diskette, and restart the system again.
7. The temporary directory from step 1 may be deleted.
Copyright 2001, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|