SOFTPAQ NUMBER: SP16774
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Intel 3D Direct Graphics Video Driver for Windows NT 4.0
VERSION: 4.03.1381.2656 Rev A
LANGUAGE: US (Global)

CATEGORY: Display

DIVISIONS: Commercial Desktops

PRODUCTS AFFECTED:
     iPAQ: C700/815e,P866/815e
     Deskpro EX: C566,C600,C633,C667,C700,C850,P667,P733,P800,P866,P933,
         P1.0GHz
     Deskpro EXS: P1.0GHz,P933,P866,P800,P733,C700,P667,C667,C633,C600,
         C566
     Deskpro EN Series: C600,C667,C733,C850,P667,P733,P800,P866,P933,
         P1.0GHz,C566 (na),C667 (na),C733 (na),P667 (na),P733 (na)
     Deskpro EN Series SFF: C600 (SFF),C667 (SFF),C733 (SFF),C850 (SFF),
         P667 (SFF),P733 (SFF),P800 (SFF),P866 (SFF),P933 (SFF),
         P1.0GHz (SFF),C566 (SFF-na),C667 (SFF-na),C733 (SFF-na),
         P667 (SFF-na),P733 (SFF-na)

OPERATING SYSTEM: Microsoft Windows NT 4.0 with Service Pack 4 or later 

SYSTEM CONFIGURATION:
Intel(R) 82810 Graphics Controller
Intel(R) 82810-DC100 Graphics Controller
Intel(R) 82810E Graphics Controller (DC 133)
Intel(R) 82815 Graphics Controller


PREREQUISITES: 
- 1.  The system must contain one of the following Intel platforms:

      Intel(R) 810  Chipset
      Intel(R) 810E Chipset
      Intel(R) 815  Chipset
      Intel(R) 815E Chipset

- 2.  The software should be installed on systems with at least 64 MB of 
      system memory.

- 3.  There should be sufficient hard disk space in the <TEMP> directory 
      (typically C:\TEMP) on the system to install this software.

EFFECTIVE DATE: July 2, 2001

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SOFTPAQ UTILITY VERSION: 5.0

SUPERSEDES: N/A

DESCRIPTION: This SoftPaq contains the Windows NT 4.0 graphics driver for the 
Intel 3D Direct Graphics chipset in the Compaq products listed above.

ENHANCEMENTS/FIXES:
 - Fixes an Application Exception Error which can result when closing the 
   Quicktime application Version 4.1.2 & Beta Version 5.0.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions.

3. After the files have been unpacked, you may delete the self-extracting
file downloaded in step 1.

4. To install, read and follow the instructions provided with the software.

5. After the installation is completed, you may delete the directory
created in step 2 if you wish.


Copyright 2001, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies