SOFTPAQ NUMBER:  SP16362
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Gigabit Driver - SCO UnixWare 7
VERSION:  7.40b
LANGUAGE:  English

CATEGORY:  Drivers 

DIVISIONS:  Systems

PRODUCTS AFFECTED:  Compaq ProLiant and ProSignia Servers running SCO
                    UnixWare 7
		    
OPERATING SYSTEM:   SCO UnixWare 7.1.0
                    SCO UnixWare 7.1.1
		   
SYSTEM CONFIGURATION:  Compaq NC7131 10/100/1000 NIC.
                       Compaq NC7132 10/100/1000 Module.
                       
PREREQUISITES:  - 
                  
		  
		
EFFECTIVE DATE:  Apr 13 ,2001

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  5.x

SUPERSEDES:  -

DESCRIPTION:  Creates a diskette containing Compaq Gigabit Driver - 
	      SCO UnixWare 7, Version 7.40b.

ENHANCEMENTS/FIXES:

       1. Fixed an issue with respect to TBI Mode for Compaq Gigabit 
	  driver on Cisco switches.

                                              

IMPORTANT:

1. During installation, any incompatible or older version package found
   on the system will have to be removed before installing this 
   package.

2. On UnixWare 7.1.1, before installing this softpaq, patch ptf7604 has
   to be removed otherwise the user might experience bad behavior from
   the Operating System.


HOW TO USE:

Steps 1-5 are performed under DOS, Microsoft Windows 3.1, Windows95 
or Windows NT.
Steps 6-8 are performed under SCO UnixWare 7.

1. Obtain a formatted 1.44-MB diskette.

2. Download the SoftPaq to a clean directory on your hard drive and 
   change to that directory.  The file that is downloaded is an 
   executable with a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
   and follow the on-screen instructions. Three files will be created:
   SP16362.TXT, SP16362._01 and QRST5.EXE.

4. Execute QRST5.EXE and you will be prompted to insert the formatted
   diskette in a drive to create a diskette containing Compaq Gigabit 
   Driver - SCO UnixWare 7.

5. After the diskettes have been created, you may delete the  
   SoftPaq file downloaded in step 2 and the files unpacked in step 3.

6. To install the Compaq Gigabit Driver - SCO UnixWare 7
   log in as "root."

7. Execute the following command to install the ptfn1000 package:

        # pkgadd -d diskette1
                
8. Follow the ON Screen instructions to complete the installation.

Copyright 1999-2001, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies