SOFTPAQ NUMBER:  SP16305
PART NUMBER:  135199-401
FILE NAME:  N/A
TITLE:  TaskSmart RapidLaunch Configuration Utility
VERSION:  2.1 Rev A
LANGUAGE:  English

CATEGORY:  Miscellaneous

DIVISIONS:  Systems

PRODUCTS AFFECTED:  TaskSmart W2200 Appliance Server,
		    TaskSmart N2400 Appliance Server,
                    TaskSmart 2000R Appliance Server,
                    TaskSmart 1500R Appliance Server,
                    TaskSmart 1200R Appliance Server,
                    TaskSmart C900 Appliance Server,
                    TaskSmart C600 Appliance Server

OPERATING SYSTEM:  Microsoft Windows 95/98/ME,
                   Microsoft Windows NT4,
                   Microsoft Windows 2000,


SYSTEM CONFIGURATION: N/A

PREREQUISITES:  1) Microsoft Windows NT4.0 - Service Pack 3 or greater
                2) Enable (15-bit) 32767 or more colors
                3) Earlier versions of Windows 95, you will need 
                   WINSOCK 2.0 support

EFFECTIVE DATE:  June 12, 2001

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  Version 5.x

SUPERSEDES:  SP14464

DESCRIPTION:  

RapidLaunch will automatically detect your Compaq appliance server 
if the appliance is on the same network as the PC running RapidLaunch. 

If your Compaq appliance server is not on the same network, 
RapidLaunch takes you through a series of windows where you record the 
unique configuration information for your server. A summary window 
allows you to check for accuracy, then prompts you to save the 
configuration information on a single diskette.

If your Compaq appliance server supports Web-based configuration and 
it was detected, you can click on the appliance server to launch the 
Web-based configuration utility. If not, you can copy the 
configuration information to your hard drive, and then copy the 
information to create additional configuration data diskettes for 
similar configurations. You can also email the information to users at
a remote location to copy to a diskette, and then set up their system.

Enhancements/Fixes:   1) Added Unit Identification functionality
		      2) Added Column Sorting on auto-discovery of 
                         devices
		      3) Added Hover-help (Tooltips)
		      4) Added RIB DHCP service capability
		      5) Added special identification of unconfigured 
                         devices.  Devices that have not been setup 
                         via RapidStartup (for those devices support-
                         ing RapidStartup) will indicate a System Name 
                         of "UNCONFIGURED".  After RapidStartup has 
                         been completed the System Name will reflect 
                         the assigned name.  Some older devices may 
                         required a reboot before properly indicating 
                         the assigned System Name.
		      6) DHCP server now detects and identifies 
                         devices that have made more than 5 requests.  
                         A query dialog is presented and the user can 
                         choose how to handle un-serviced devices.
		      7) Detection system now identifies CIM pages 
                         that are under password control and displays 
                         a key icon next to the locked pages.  The 
                         locked pages only display when the "Show" 
                         drop-down box is set to "All Compaq devices"
		      8) Detection system now uses the CIM "System 
                         Name" instead of a gethostbyname call.  This 
                         speeds up the process considerably where no 
                         authoritative DNS is present.  The column for
                         this information has been re-titled "System 
                         Name".
		      9) The separate columns in the client interface 
                         list for Search Start and Search End have 
                         been combined into 1 column.
		     10) The RapidLaunch DHCP server can now be 
                         started even when another DHCP server was 
                         detected on the network.  This is to solve 
                         the problem of a DHCP server that has no 
                         addresses to give out.


HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.  The file 
   downloaded is a self-extracting executable with a filename based 
   on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
   Enter "Y" to confirm the unpacking of files into the download 
   directory.

  The files will be unpacked into the download directory as follows:
  \CACHING INFORMATION AND UTILITIES\
  \CONFIGURATION PROGRAM FILES\CPQCACHESETUP.EXE
  \CONFIGURATION PROGRAM FILES\CPQNASSETUP.EXE
  \CONFIGURATION PROGRAM FILES\CPQWEBSETUP.EXE
  \HELP\CPQAPPSETUP.CNT
  \HELP\CPQAPPSETUP.HLP
  \HELP\CPQCACHESETUP.CNT
  \HELP\CPQCACHESETUP.HLP
  \HELP\CPQNASSETUP.CNT
  \HELP\CPQNASSETUP.HLP
  \HELP\CPQWEBSETUP.CNT
  \HELP\CPQWEBSETUP.HLP
  \HTML\BLENDER.BMP
  \HTML\BULLETRIGHT_NOBACKGROUND.BMP
  \HTML\CCUMODELCHOOSER.HTM
  \HTML\FREEZER16BIT.BMP
  \HTML\MIXER16BIT.BMP
  \HTML\NWOK16BIT.BMP
  \HTML\W2200ANIM2.GIF
  \MIBS\ICS.MIB
  \MULTIMEDIA\
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\HELP\SDPLANNER.CHM    
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\X86\ACTIVATE.EXE
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\X86\DEACTIVATE.EXE
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\X86\PERFDATA.EXE
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\X86\SDPERFORMANCECOUNTERS.H
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\X86\SDPERFORMANCECOUNTERS.INI
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\X86\SDPLANNER.DLL
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\X86\SDPLANNER.EXE
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\X86\SDPLANNER.SYS
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\X86\SDPUNIN.DLL
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\_INST32I.EX_
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\_ISDEL.EXE
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\_SETUP.DLL
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\_SYS1.CAB
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\_USER1.CAB
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\DATA.TAG
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\DATA1.CAB
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\LANG.DAT
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\LAYOUT.BIN
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\OS.DAT
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\SDP.PDF
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\SETUP.EXE
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\SETUP.INI
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\SETUP.INS
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\SETUP.ISS
  \NAS INFORMATION\SWVR SNAPSHOT PLANNER\SETUP.LID
  \AUTORUN.INF
  \README.TXT
  \SETUP.EXE

3. After the files have been unpacked, you may delete the self-
   extracting file downloaded in step 1.

4. Installation is complete.

Copyright 2000, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies