PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP16295

SP16295 — Compaq Systems ROMPaq Firmware Upgrade Diskette for Compaq ProLiant 8000(P41), and 8500(P42) Servers.

SoftPaq Number SP16295
Filename sp16295.exe
Size 678K
Date April 12, 2001
Version N/A
Operating System All
Products Affected ProLiant 8000 Server (P41) ProLiant 8500 Server (P42)
Supersedes SP13159

  Download sp16295.exe  


Readme

SOFTPAQ NUMBER: SP16295
PART NUMBER: 158642-005
FILE NAME: N/A
TITLE:  Compaq Systems ROMPaq Firmware Upgrade Diskette for Compaq ProLiant
        8000(P41), and 8500(P42) Servers.
VERSION:    4.04 Rev. A
LANGUAGE: English

CATEGORY: ROMPaqs

DIVISIONS:  Systems

PRODUCTS AFFECTED:
                   ProLiant 8000 Server (P41)
                   ProLiant 8500 Server (P42)



OPERATING SYSTEM AND VERSION:  N/A

SYSTEM CONFIGURATION:  N/A

PREREQUISITE:  N/A

EFFECTIVE DATE:   April 12, 2001

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION: 2.X

SUPERSEDES:  SP13159

DESCRIPTION:   This release provides updated system ROM images
for the latest maintenance releases of ProLiant 8000(P41)
8500(P42) Server products.



Features Added -

                    ProLiant 8000 ROM P41 (02/16/01)
                    ===============================================
		            Support has been added for the Intel 700/900mhz
               	    Pentium III Xeon processors.

		    	
                    


                    ProLiant 8500 ROM P42 (02/16/01)
                    ===============================================
		            Support has been added for the Intel 700/900mhz
                    Pentium III Xeon processors.

		    
                    

 Problems Fixed -
               
                    ProLiant 8000 ROM P41 (02/16/01)
                    ===============================================

		            Fixed Floppy disable override switch.

                    Changed Fan speed to support 900mhz Processors.



                    ProLiant 8500 ROM P42 (02/16/01)
                    ===============================================
		
                    Fixed Floppy disable override switch.

                    Changed Fan speed to support 900mhz Processors.
		
		
		


		   	




HOW TO USE:

1.  Obtain a formatted 1.44 MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change to that directory.
The file that is downloaded is SP16295.EXE.

3.  From that drive and directory, execute the SoftPaq file:
SP16295 [ENTER]
You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to
create diskette.

4.  After the diskette is created, you may delete the downloaded file
SP16295.EXE if you wish.

5.  For installation instructions refer to ROMPaq Firmware Upgrade
Instructions below.


ROMPaq Firmware Upgrade Instructions

1.  Insert the ROMPaq diskette into the bootable diskette drive.

2.  Turn unit off, then back on, to boot from the ROMPaq diskette.

3.  After the ROMPaq utility has scanned the system for installed and supported devices, a screen appears indicating the ROMPaq diskette version.  Press Enter.

4.  A list of images installed and supported by this version of the ROMPaq Firmware Upgrade diskette will then be displayed.  Press Enter to select the desired image on the list.

5.  After pressing Enter, the utility will check to see if there is a newer firmware image available on the diskette for the selected device.

If a newer firmware image IS NOT available on the diskette, the utility will display a message indicating this.  In this case, press Enter and skip to step 8 below.

If a newer firmware image IS available on the diskette, the utility will prompt you to "Select an image".  Normally, there will only be a single firmware image to select, so press Enter to select the firmware     revision shown.

6.  When the utility asks whether it is OK to reprogram the selected device(s), press Enter to proceed.

IMPORTANT: Do not interrupt the Flash reprogramming process in any way, or the firmware on the device being programmed may be destroyed.
**Do not turn off power**
** Do not remove or install hot-pluggable disk drives**

7.  When the Flash process has completed, a message will be displayed.  Press Enter to continue.  (If an error occurs, contact Compaq Technical Support.)

8.  The utility will ask you to confirm that you want to continue.  Press Enter to continue.

9. When prompted, remove the ROMPaq diskette from the floppy drive and power cycle the system.

Copyright 2001, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks of their
respective companies



PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home