PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP16161

SP16161 — Workstations HAL Upgrade/Recovery Utility

SoftPaq Number SP16161
Filename sp16161.exe
Size 1109K
Date April 24, 2001
Version 1.00 Rev B
Operating System Windows NT 4.0
Products Affected Professional Workstation SP750, SP700, AP400, AP500, AP550, 5000/5100, 6000, 8000
Supersedes SP12164
Category Utilities
Type Driver

  Download sp16161.exe  


Description

The HAL Upgrade/Downgrade Utility is used to upgrade from the Uniprocessor HAL and kernel files to the Multiprocessor HAL and kernel files. Both the HAL and the kernel files are located on the Microsoft Windows NT Workstation 4.0 CD.

Enhancements

Installation Instructions

Install="setup.exe"


Readme

SOFTPAQ NUMBER: SP16161
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Workstations HAL Upgrade/Recovery Utility
VERSION: 1.00 Rev B
LANGUAGE: Japanese

CATEGORY: Operating System Enhancements

DIVISIONS: Workstations

PRODUCTS AFFECTED: Professional Workstation SP750, SP700, AP400, AP500, AP550,  
                                            5000/5100, 6000, 8000

OPERATING SYSTEM: Microsoft Windows NT 4.0
            NOTE: This Softpaq supports Service Pack 6.0.

SYSTEM CONFIGURATION: N/A

PREREQUISITES: N/A

EFFECTIVE DATE: April 24, 2001

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SOFTPAQ UTILITY VERSION: 5.0

SUPERSEDES: SP12164

DESCRIPTION: The HAL Upgrade/Downgrade Utility is used to upgrade from the Uniprocessor 
HAL and kernel files to the Multiprocessor HAL and kernel files. Both the HAL and the 
kernel files are located on the Microsoft Windows NT Workstation 4.0 CD.

The Compaq HAL Recovery Option is a feature that allows a user with a multiprocessor 
system to recover from blue-screen errors that could occur as a result of:

 - Mismatching hardware with the installed HAL 
    (e.g., multiprocessor HAL with one processor only)
 - Problems with the Multiprocessor HAL file
 - Problems with the Uniprocessor HAL file

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive. The file downloaded 
is a self-extracting executable with a filename based on the SoftPaq Number 
above.

2. Execute the downloaded file and follow the on-screen instructions.

3. After the files have been unpacked, you may delete the self-extracting file 
downloaded in step 1.

4. To install, read and follow the instructions provided with the software.

5. To create (optional) installation (or other deliverable) diskette(s) run 
MAKEDISK.BAT and follow the on-screen instructions. MAKEDISK.BAT is included 
only if installation diskette(s) creation is an option.

6. After the installation is completed, you may delete the directory created in 
step 2 if you wish.


Copyright 2001, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home