Softpaq Solution:  SP1615
File Name:  EFS210C 
Title:  Compaq Extended Feature Supplement 2.10C for SCO UNIX 3.0
Version:  2.10 Rev C
Language:  English

CATEGORY:  Drivers/Servers

EFFECTIVE DATE:  3 June 1996

PRODUCTS AFFECTED: Any Compaq Server Products 

OPERATING SYSTEM:
       SCO OpenServer Enterprise System, Version 3.0
       SCO OpenServer Host System, Version 3.0
       SCO OpenServer Desktop System, Version 3.0

SYSTEM CONFIGURATION:  Any Compaq system running one of the above operating systems

SUPERSEDES:  SP1426

DESCRIPTION:
The Compaq Extended Feature Supplement 2.10C for SCO UNIX 3.0 is a collection
of device drivers to provide maximum performance with Compaq hardware.
EFS 2.10C also includes several utilities to monitor and increase the
performance of your Compaq server.  The only differences between EFS 2.10C and
 2.10B are changes made to the documentation.  Support for the Compaq 
Smart-2/P Drive Array Controller will be available for EFS 2.10 through a 
separate Softpaq.

KNOWN LIMITATIONS:
o The  Disaster Recovery utility will not backup drives over 2GB in size.
o There is no Wellness support for EFS 2.10C on Proliant 5000 systems.

DEVICE DRIVERS IN EFS 2.10C
    o Compaq Network Adapter Driver and Configuration Utility.  The
       Compaq NetFlex Controller (cet) driver supports the family of
       Compaq NetFlex Controllers under SCO UNIX 3.2v4, Open Desktop,
       or Open Server operating systems.
     
     o Compaq SCSI-2 Support.  Compaq SCSI-2 support includes drivers
       for the Integrated 32-Bit Fast-SCSI-2 Controllers in the Compaq
       ProSignia and Compaq ProLiant Family of Servers and the Integrated
       SCSI-2 options port on the Compaq SystemPro/XL Server.
       Support is also provided for  the following options cards:
	    Compaq 32-Bit Fast-SCSI-2 Controller card
	    Compaq 32-Bit Fast-Wide SCSI-2/E Controller card
	    Compaq 32-Bit Fast-Wide SCSI-2/P Controller card

     o Compaq Smart-2 /E Drive Array Controller.

     o ProLiant Storage System Support.  The Compaq EFS 2.10C includes a
       driver to support the features of the ProLiant Storage System
       when connected to the Compaq 32-Bit Fast-SCSI-2 Controller or the
       Compaq 32-Bit Fast-Wide SCSI-2 Controller.
     
     o Compaq System Wellness Driver.  System Wellness features include
       hardware components that monitor system activity,  temperature
       conditions, fan operation, EISA bus utilization, and operation
       system up time. It also provides Automatic Server Recovery and
       Health Log Support for the Compaq  SystemPro/XL, Compaq
       ProLiant, and Compaq ProSignia Servers.
     
     o Compaq Intelligent Drive Array support.  Support is included for
       the Compaq Intelligent Drive Array, Compaq IDA-Expansion, Compaq
       IDA-2, Compaq SMART, and Compaq SMART-2/E controllers.  Note that
       EFS 2.10b does not include support for the Compaq SMART-2/P
       controller (see KNOWN LIMITATIONS section).
    
     o Boot-Time Loadable Driver (BTLD).  The Boot-Time Loadable Driver
       diskette is used when installing SCO OPEN SERVER RELEASE 3.0 on
       Compaq systems.
     
     UTILITIES INCLUDED IN EFS 2.10C

     o SCSI-2 Management Utility.  The SCSI-2 Management Utility
       provides support for the Compaq 32-Bit Fast-SCSI-2 Controller,
       the Compaq Integrated SCSI-2 Options Port, and the Compaq 6260
       SCSI-2 Controller, and the Compaq TurboDAT Autoloader.
     
     o Intelligent Drive Array (IDA) Diagnostic Utility.  The
       Intelligent Drive Array (IDA) Diagnostic Utility allows the
       administrator to view Compaq Drive Array controller status.
     
     o Compaq System Monitor Utility.  The System Monitor utility
       (cpqmon) displays system activity and performance information.
     
     o Inspect Utility.  The Inspect Utility includes a driver and
       utility for providing information about Compaq system hardware
       configurations.

     o Compaq UPS Support.  The Uninterruptible Power Supply Utility
       (UPS) will gracefully shutdown a server if the AC power fails.
     
     o Disaster Recovery Utility.  The Disaster Recovery Utility
       creates a bootable Disaster Recovery diskette and a Disaster
       Recovery tape. The diskette and tape are used to restore the
       primary hard disk in the event of a failure.
     
     o Compaq PageMarq Support.  The PageMarq support includes the lp
       model CPQPagemarq printer interface script which provides
       support for the Compaq PageMarq printer. The cpqfax program
       provides support for sending faxes through the Compaq PageMarq
       printer.

     o Compaq Single Launch Point Utility.  The Single Launch Point
       Utility allows execution of EFS 2.10C utilities by selecting
       them from a menu.

HOW TO USE: 

IMPORTANT: DO NOT TURN OFF POWER TO THE SYSTEM WHILE PERFORMING THIS PROCEDURE!

Follow these steps to create the six (6) EFS 2.10 Rev C diskettes: 

1.  Download the SoftPaq to an empty directory and change to that directory.

2.  From that drive and directory, execute the SoftPaq file:  SP1615 [ENTER]
    The following files should be created: 
        EFS210._01
        EFS210._02
        EFS210._03
        EFS210._04
        EFS210._05
        EFS210._06
        QRST.EXE
        SP1615.DOC

3.  Obtain 6 DOS formatted 1.44 MB diskettes
IMPORTANT: Only 1.44 MB, DOS formatted diskettes can be used, other types of media cannot be substituted.

4.  Follow the further instructions in SP1615.DOC to create the diskettes by executing the QRST.EXE program and then read all information in the README.EFS file on the documentation diskette before installing the EFS.

5.  After the diskettes are created, you may delete the downloaded file SP1615.EXE and the other files created on the hard drive if you wish.

Copyright 1996, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies