Softpaq Solution:  SP1611
File Name:  RSTCRD.COM 
Title:  Reset Frame Grabber Cards on Desktops
Version:  2.00

CATEGORY:  Software Solutions / Desktop

EFFECTIVE DATE:  25 March 1996

PRODUCTS AFFECTED:  Deskpro 450, 466, 4100, 575, 590, 5100, 5120, 5133;
ProLinea 450, 466, 4100, 575, 590, 5100, 5120, 5133

OPERATING SYSTEM:  MS-DOS 3.0 or greater

SYSTEM CONFIGURATION:  One, two or three Frame Grabber Cards (ISA) from Imaging Technology Incorporated installed in one of the desktop units mentioned above. 

SUPERSEDES:  N/A

DESCRIPTION:  This patch corrects the "No Fixed Disk Present " error when attempting a warm boot (Ctrl-Alt-Del) on certain Deskpro and ProLinea units containing one or more Frame Grabber Cards (ISA) from Imaging Technology Incorporated.

HOW TO USE:

1.  Download the SoftPaq to a directory on your hard drive and change to that directory.  The file that is downloaded is SP1611.EXE.

2.  From that drive and directory, execute the SoftPaq file:
SP1611[ENTER]
The following files should be created:
RSTCRD.COM 
SP1611.DOC

3.  After the files are created, you may delete the downloaded file SP1611.EXE if you wish.

4. Copy RSTCRD.COM from step 2 to the root directory.

5.  Using an editor, add a line to the end of your AUTOEXEC.BAT file to execute at system boot.  
The syntax is:
 [c:][path]RSTCRD.COM  [i/o address board 1] [i/o address board 2] [i/o address board 3]

where [i/o address board #] =
0 = 180h	4 = 280h	7 = 310h
1 = 190h	5 = 290h	8 = 320h
2 = 250h	6 = 300h	9 = 340h
3 = 260h

EXAMPLES:
c:\RSTCRD 5		(One card set for base address of 290h)
c:\RSTCRD 6 7		(Two cards set for base address of 300h and 310h respectively)
c:\RSTCRD 1 3 8	(Three cards set for case address of 190h, 260h and 320h respectively)
c:\RSTCRD		(The default setting is for two cards set for 280h and 290h)

Copyright 1996, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies