SOFTPAQ NUMBER:  SP15774
PART NUMBER:  191589-002
FILE NAME:  N/A
TITLE:  Presario 18XL Specific Models System ROM Update 
VERSION:  F.13 (09/13/00)
LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Consumer

PRODUCTS AFFECTED:  Compaq Presario 18XL280, 18XL281, and 1800XL2

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  October 20, 2000

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.0

SUPERSEDES:  N/A

DESCRIPTION:  Creates a bootable diskette to update the System ROM 
on the Presario 18XL Series notebook models listed above.

Enhancements/Fixes:
 -  Adds microcode support for newer processors.

HOW TO USE:

1.  Format a 1.44-MB diskette.

2.  Download the SoftPaq to a temporary, empty directory on your
    hard drive and change to that directory.  The file downloaded
    is a self-extracting executable with a filename based on the
    SoftPaq Number above.

3.  From that drive and directory, execute the SoftPaq file.
    You will be prompted to place the formatted 1.44 MB diskette
    into a diskette drive to create the ROMPaq diskette.

4.  After the diskette is created, you may delete the downloaded
    file if you wish.

5.  Shutdown and turn off the computer.  Wait 15 seconds.  Place the 
    ROMPaq diskette into drive A: and turn on the power, allowing the 
    computer to boot from the diskette.

6.  The ROMPaq diskette will automatically update the System ROM and 
    notify you when the update is finished.

    CAUTION:  DO NOT TURN OFF YOUR COMPUTER DURING THE UPDATE PROCESS

7.  When the ROM update is finished, you will need to turn the computer 
    off and back on for the changes to be in effect.  Remove the ROMPaq 
    diskette from the computer.  Turn the computer's power switch OFF, 
    wait 15 seconds, then turn the switch ON again.

Copyright 2000, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies