| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP1564 — While printing to a NCR 5223 Passbook/General Purpose Printer from a
| SoftPaq Number |
SP1564 |
| Filename |
sp1564.exe |
| Size |
37K |
| Date |
05 March 96 |
| Version |
N/A |
| Operating System |
All |
Readme
Softpaq Solution: SP1564
File Name: BIDIR50.SYS
Title: Fix Driver for NCR 5223 Passbook Printer on Certain Compaq Desktops
Version: 2.00
CATEGORY: Software Solutions / Desktop
EFFECTIVE DATE: 29 Feb 1996
PRODUCTS AFFECTED: Deskpro 450, 466, 4100, 575, 590, 5100, 5120, 5133;
ProLinea 450, 466, 4100, 575, 590, 5100, 5120, 5133
OPERATING SYSTEM: MS-DOS 3.0 or greater
SYSTEM CONFIGURATION: One of the Compaq models named above, connected to an NCR 5223 Passbook/General Purpose Printer, and using printer driver BI5223.SYS (Version 1.03).
SUPERSEDES: N/A
PREREQUISITE: BI5223.SYS (Version 1.03) 5223 Bi-directional Parallel Driver
DESCRIPTION: While printing to a NCR 5223 Passbook/General Purpose Printer from one of the Compaq models named above in PRODUCTS AFFECTED, the user may experience a system lock-up.
BI5223.SYS (Version 1.03) looks for the INTERRUPT bit <bit 2> in the Printer Data Register [printer base address +1] to be set low when an interrupt is generated. Bit 2 on the Compaq models affected will always return highs when read. Bit 1 on the Compaq models affected is the EPP INTERRUPT bit.
BIDIR50.SYS (Version 2.00) corrects this problem by changing the BI5223.SYS (Version 1.03) driver in memory to look at bit 1 in the Printer Data Register [printer base address +1] and changing parallel port to EPP ver. 1.9 mode.
HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP1564.EXE.
2. From that drive and directory, execute the SoftPaq file:
SP1564 [ENTER]
The following files should be created:
BIDIR50.SYS
SP1564.DOC
3. After the files are created, you may delete the downloaded file SP1564.EXE if you wish.
4. Copy BIDIR50.SYS from step 2 to the directory where BI5223.SYS is installed.
5. Using an editor, add a line after the BI5223.SYS line in your CONFIG.SYS file to execute at system boot. BIDIR50.SYS must be installed after BI5223.SYS. The syntax is:
DEVICE=[c:][path]BIDIR50.SYS
Copyright 1996, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|