PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP15581

SP15581 — Compaq Notebook 100 System BIOS Update

SoftPaq Number SP15581
Filename sp15581.exe
Size 0K
Date September 22, 2000
Version 1.12.00
Operating System Windows 98, Windows 2000
Products Affected Notebook 100 Series
Supersedes SP14889

  Download sp15581.exe  


Readme

SOFTPAQ NUMBER:  SP15581
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Notebook 100 System BIOS Update
VERSION:  1.12.00
LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Portables

PRODUCTS AFFECTED:  Notebook 100 Series

OPERATING SYSTEM:  Microsoft Windows 98, 
                   Microsoft Windows 2000

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  For full functionality, this BIOS update must be used with the 
                Keyboard BIOS Update, Version 1.14.00, available in SoftPaq SP15582.

EFFECTIVE DATE:  September 22, 2000

ELECTRONIC DISTRIBUTION ALLOWED:  Yes 

SOFTPAQ UTILITY VERSION:  5.X

SUPERSEDES:  SP14889 

DESCRIPTION:  Contains a utility to update the System BIOS for 
Compaq Notebook 100 Series computers only. 

Enhancements/Fixes:
 - Fixes the issue where some PS/2 keyboards were not recognized on power-up.
 - Allows user to check the Admin password at restart or in Setup Configuration 
   Utility (SCU).
 - No longer beeps when Hotkey is pressed, to prevent dropping the MODEM link.
 - Fixes the issue where all audio was lost when restarting in DOS mode.
 - Fixes external PS/2 mouse failure by removing external keyboard patch code 
   (requires Keyboard BIOS Update, Version 1.14.00, available in SoftPaq SP15582).
 - Adds "LCD Stretch" feature in Setup Configuration Utility (SCU).

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Obtain a blank formatted floppy diskette and put the diskette into
drive A:. Execute the downloaded file and follow the on-screen instructions. 
 
3. Enter "Y" to confirm the unpacking of files into the download
directory on the diskette. After the files have been unpacked, the
SoftPaq utility will create a bootable floppy diskette.

4. Installation instructions: 
  a. Connect the unit to AC power
  b. Place the diskette in drive a:
  c. Boot the system and follow the on-screen instructions.
  d. Remove the diskette and restart the system after system shuts down.

Copyright 2000, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home