PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP15567

SP15567 — Compaq 56K Option Kit PCI Modem Driver for Windows 2000

SoftPaq Number SP15567
Filename sp15567.exe
Size 529K
Date September 12, 2000
Version 2.164.013.021 Rev A
Operating System Windows 2000
Products Affected Compaq 56K Option Kit International Controllerless PCI Modem Part Numbers: 166358-xxx 168757-B2x

  Download sp15567.exe  


Readme

SOFTPAQ NUMBER: 15567 
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Compaq 56K Option Kit PCI Modem Driver for Windows 2000
VERSION: 2.164.013.021 Rev A
LANGUAGE: N/A   

CATEGORY: Drivers

DIVISIONS: Commercial Desktops

PRODUCTS AFFECTED:  Compaq 56K Option Kit International Controllerless PCI Modem
                    Part Numbers: 166358-xxx
                                  168757-B2x

OPERATING SYSTEM: Microsoft Windows 2000

SYSTEM CONFIGURATION: N/A 

PREREQUISITES: N/A 

EFFECTIVE DATE: September 12, 2000  

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION: 5.0

SUPERSEDES: N/A

DESCRIPTION: This is the Windows 2000 driver for the Compaq 56K Option 
             Kit International Controllerless PCI Modem.

HOW TO USE:

1. Download the SoftPaq to a temporary, empty directory on your 
Hard drive.  The file downloaded is a self-extracting executable 
with a filename based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Press the "Spacebar" to confirm the unpacking of files into the download directory. 

3. After the files have been unpacked, you may delete the self-extracting file 
Downloaded in step 1.

4. To install the driver, follow either of the two installation options below.

   Installation option #1:

   a) Open the Control Panel and select Add/Remove Hardware. 
 
   b) From the Hardware Wizard, select "Add a new device," then click Next. 

   c) Select "No, I want to select the hardware from a list," then click Next. 

   d) Select "Modem," then click Next. 

   e) Check the box "Don't detect my modem, I will select from a list."

   f) Click "Have Disk," then select the path to the temporary directory on 
      the hard drive where the SoftPaq unpacked the files. 

   g) Select the .INF file, then click "Finish."


   Installation option #2:

   a) Allow Windows 2000 to automatically detect the modem and bring up the 
      Hardware Wizard. 

   b) Select the path to the temporary directory on the hard drive where 
      the SoftPaq unpacked the files. 


Copyright 2000, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home