| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP15352 — Professional Workstation SP700 Flash Recovery ROMPaq
| SoftPaq Number |
SP15352 |
| Filename |
sp15352.exe |
| Size |
436K |
| Date |
September 6, 2000 |
| Version |
686W6_071299 Rev A |
| Operating System |
All |
| Products Affected |
Compaq Professional Workstation SP700 |
| Supersedes |
SP13754 |
Readme
SOFTPAQ NUMBER: SP15352
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Professional Workstation SP700 Flash Recovery ROMPaq
VERSION: 686W6_071299 Rev A
LANGUAGE: English
CATEGORY: ROMPaqs
DIVISIONS: Workstations
PRODUCTS AFFECTED: Compaq Professional Workstation SP700
OPERATING SYSTEM: N/A
SYSTEM CONFIGURATION: N/A
PREREQUISITES: N/A
EFFECTIVE DATE: September 6, 2000
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 2.x
SUPERSEDES: SP13754
DESCRIPTION: Creates the Flash Recovery ROMPaq Firmware Diskette for the
Compaq Professional Workstation SP700. The flash recovery diskette
is used when the System ROM is corrupt and a normal ROMPaq diskette will
not work because no video is available. The flash recovery ROMPaq
overcomes this situation by using a combination of system beeps and
system LEDs to communicate with the user. The diskette contains an image
of the 07-12-99 SP700 System ROM.
Enhancements/Fixes:
- Corrects a condition that was causing the system to only show 32
MB of RAM during POST. This occured if the user entered CTRL-C or
CTRL-A to access the setup program for Adaptec or Symbios SCSI
controllers and then warm booted their systems.
HOW TO USE:
1. Obtain a formatted 1.44-MB diskette.
2. Download the SoftPaq to a directory on your hard drive and change
to that directory. The file that is downloaded is an executable with
a filename based on the SoftPaq Number above.
3. From that drive and directory, execute the downloaded file
and follow the on-screen instructions. You will be prompted to
insert a formatted diskette in a drive to create the diskette.
4. After the diskette has been created, you may delete the
SoftPaq file downloaded in step 2.
5. Keeping the newly created diskette in the A: drive, cycle
system power to boot from the ROMPaq diskette.
6. Follow the on-screen instructions to upgrade the System ROM.
WARNING: DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING
THE UPGRADE PROCESS!!!!
Copyright 2000, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|