SOFTPAQ NUMBER:  SP15343
PART NUMBER:  352660-404
FILE NAME:  N/A
TITLE:  Professional Workstation AP200 System ROMPaq
VERSION:  686W7_071399 Rev A
LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Workstations

PRODUCTS AFFECTED:  Compaq Professional Workstation AP200

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION: N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  September 1, 2000

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP13348

DESCRIPTION:  Creates a ROMPaq diskette that allows a user to update the 
System ROM in a Compaq Professional Workstation AP200 to the 07/13/99 version.  
The diskette also contains foreign language modules that can be used to 
flash foreign language strings into the system ROM for use in F10 Setup.  

Enhancements/Fixes:

- Added support for Intel Pentium III processor stepping change C0.

	
HOW TO USE:

1. Obtain a formatted 1.44-MB diskette.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert a formatted diskette in the drive to create the diskette.

4. After the diskette has been created, you may delete the  
SoftPaq file downloaded in step 2.

5. Keeping the newly created diskette in the A: drive, cycle 
system power to boot from the ROMPaq diskette.

6. Follow the on-screen instructions to flash the System ROM.

WARNING: DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER 
DURING THE SYSTEM ROM FLASH PROCESS!!!!

Flash Recovery Instructions (in case of system ROM corruption):

1) Power down the computer to be flashed.  

2) Insert the ROMPaq diskette into the floppy drive and power up 
   the computer.  If the system ROM is corrupt the computer will beep and
   no video will be seen. 

3) If the flash diskette is bad or no diskette is installed, the NUM LOCK 
   keyboard LED will turn ON.  The CAPS LOCK and SCROLL LOCK keyboard LEDs 
   will be OFF.

4) If the computer has a setup password set, the CAPS LOCK keyboard LED will 
   be ON.  The NUM LOCK and SCROLL LOCK keyboard LEDs will be OFF.  Please 
   enter your setup password at this time.

5) The ROMPaq diskette will boot and begin the flash process.  Do not 
   turn off the computer until the flash is completed.

6) If the flash is SUCCESSFUL, the NUM LOCK, CAPS LOCK, and SCROLL LOCK 
   keyboard LEDs will be turned ON.  Also, the computer will play a series of 
   rising tones at the end of a good flash.  Remove the ROMPaq diskette
   and cycle power.

   If the flash FAILS, the SCROLL LOCK LED will be ON and the CAPS LOCK and 
   NUM LOCK LEDS will be OFF.

WARNING: DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER 
DURING THE SYSTEM ROM FLASH PROCESS!!!!

Copyright 2000 Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.