PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP1417

SP1417 — Presario 5500/9500 Windows 3.1 Video Drivers, Version 1.6 Rev B1;

SoftPaq Number SP1417
Filename SP1417.exe
Size 612K
Date 19 December 95
Version N/A
Operating System All

  Download SP1417.exe  


Readme

Softpaq:  SP1417
Part Number:  214069-001
Title:  Presario 5500/9500 Windows 3.1Video Drivers
Version:  1.6 Rev B1

CATEGORY:  Drivers / Video

EFFECTIVE DATE:  December 5 1995

PRODUCTS AFFECTED:  Presario 5500 and 9500 Families with Windows 3.1 only

OPERATING SYSTEM:  DOS

SYSTEM CONFIGURATION:  Windows 3.1x

SUPERSEDES:  None

DESCRIPTION:  This creates a diskette containing the Windows 3.1 video drivers for the S3 Trio 64V+ video controller used on the Presario 5500 and 9500 Families.  Do NOT use this with the Presario 7100 Family.  Do NOT use this on systems running Windows 95.  Also download Softpaq 1440 for Windows 3.1 systems.  It contains the S3 Monitor Selection Utility.

HOW TO USE:

1.  Obtain 1 formatted 1.44 MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change to that directory.  The file that is downloaded is SP1417.EXE.

3.  From that drive and directory, execute the SoftPaq file:
    SP1417[ENTER]
You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to create the diskette.

4.  After the diskette is created, you may delete the downloaded file SP1417.EXE if you wish.

5.  Close Windows and type: CD C:\WINDOWS [Enter]

6.  From the C:\WINDOWS prompt, type: SETUP [Enter]

7.  On the Windows Setup screen, highlight the Display setting using the up/down arrow keys and press [Enter].

8.  Press the down arrow key until the following selection is highlighted:
    "Other display (Requires disk from OEM)..."
    and press [Enter]

9.  Insert the new driver diskette in the A: drive. Make sure the path listed is A:\ and press [Enter]

10.  Highlight the desired video resolution/color depth from the new list and press [Enter]

11.  Verify the new setting on the Windows Setup screen.  Make sure "Accept the configuration shown above" is highlighted and press [Enter]

12.  The new drivers will be installed .  To restart Windows 3.1, type WIN at the DOS prompt.

Copyright 1995, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.



PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home