| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP14167 — Compaq Firmware Update Diskette for Workstation Hard Drives
| SoftPaq Number |
SP14167 |
| Filename |
sp14167.exe |
| Size |
1209K |
| Date |
May 4, 2000 |
| Version |
1.00 Rev A |
| Operating System |
All |
| Products Affected |
Compaq Deskpro Workstation: Model AP240, AP250 Compaq Professional Workstation: Model AP200, AP550, SP750 |
Readme
SOFTPAQ NUMBER: SP14167
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Compaq Firmware Update Diskette for Workstation Hard Drives
VERSION: 1.00 Rev A
LANGUAGE: English
CATEGORY: ROMPaqs
DIVISION: Workstations
PRODUCTS AFFECTED:
Compaq Deskpro Workstation: Model AP240, AP250
Compaq Professional Workstation: Model AP200, AP550, SP750
OPERATING SYSTEM: N/A
SYSTEM CONFIGURATION: N/A
EFFECTIVE DATE: May 4, 2000
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 4.X
SUPERSEDES: N/A
DESCRIPTION: Creates a bootable Compaq Firmware Update diskette for updating the
hard drive firmware for Compaq Atlas 10K 9, 18, and 36GB WLS Hard Drives in the
Workstation models listed above.
Enhancements/Fixes:
- Updates the firmware from UCJ5 to UCQ5 to reduce the "seek" noise level
of the drive.
HOW TO USE:
1. Obtain one (1) formatted 1.44-MB diskette.
2. Download the SoftPaq to a directory on your hard drive and change
to that directory. The file that is downloaded is an executable with
a filename based on the SoftPaq Number above.
3. From that drive and directory, execute the downloaded file
and follow the on-screen instructions. You will be prompted to
insert a formatted diskette in a drive to create the diskette.
4. After the diskette has been created, you may delete the
SoftPaq file downloaded in step 2.
5. The Compaq Firmware Update diskette is a self-booting diskette. Place the
diskette into your drive A: diskette drive and power cycle your
system.
6. At the command prompt type UPDATE.
7. Follow the on screen instructions.
NOTE: This update only works when booted from a DOS diskette.
It will not work when run from a protected mode DOS prompt.
The program will terminate upon completion of update. A complete power cycle
will be required for the update to be in effect. Remove your disk and
power cycle your system. If the errors persist after the firmware upgrade, follow
the IM message instruction and contact Compaq technical support.
Copyright 2000, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered trademarks
of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|