| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP14072 — Compaq 56K Option Kit PCI Modem Driver for Windows 2000
| SoftPaq Number |
SP14072 |
| Filename |
sp14072.exe |
| Size |
540K |
| Date |
September 7, 2000 |
| Version |
212.640.10 Rev A |
| Operating System |
Windows 2000 |
| Products Affected |
Compaq 56K Option Kit International Controllerless PCI Modem Part Numbers: 321500-xxx 321506-B2x |
Readme
SOFTPAQ NUMBER: 14072
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Compaq 56K Option Kit PCI Modem Driver for Windows 2000
VERSION: 212.640.10 Rev A
LANGUAGE: N/A
CATEGORY: Drivers
DIVISIONS: Commercial Desktops
PRODUCTS AFFECTED: Compaq 56K Option Kit International Controllerless PCI Modem
Part Numbers: 321500-xxx
321506-B2x
OPERATING SYSTEM: Microsoft Windows 2000
SYSTEM CONFIGURATION: N/A
PREREQUISITES: N/A
EFFECTIVE DATE: September 7, 2000
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 5.0
SUPERSEDES: N/A
DESCRIPTION: This is the Windows 2000 driver for the Compaq 56K Option
Kit International Controllerless PCI Modem.
HOW TO USE:
1. Download the SoftPaq to a temporary, empty directory on your
Hard drive. The file downloaded is a self-extracting executable
with a filename based on the SoftPaq Number above.
2. Execute the downloaded file and follow the on-screen instructions.
Press the "Spacebar" to confirm the unpacking of files into the download directory.
3. After the files have been unpacked, you may delete the self-extracting file
Downloaded in step 1.
4. To install the driver, follow either of the two installation options below.
Installation option #1:
a) Open the Control Panel and select Add/Remove Hardware.
b) From the Hardware Wizard, select "Add a new device," then click Next.
c) Select "No, I want to select the hardware from a list," then click Next.
d) Select "Modem," then click Next.
e) Check the box "Don't detect my modem, I will select from a list."
f) Click "Have Disk," then select the path to the temporary directory on
the hard drive where the SoftPaq unpacked the files.
g) Select the .INF file, then click "Finish."
Installation option #2:
a) Allow Windows 2000 to automatically detect the modem and bring up the
Hardware Wizard.
b) Select the path to the temporary directory on the hard drive where
the SoftPaq unpacked the files.
Copyright 2000, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|