PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP13991

SP13991 — Professional Workstation AP550 and SP750 ROM Image for Remote ROM Flash

SoftPaq Number SP13991
Filename sp13991.exe
Size 489K
Date June 1, 2000
Version 686J4_v2.13
Operating System All
Products Affected Compaq Professional Workstation AP550 and SP750
Supersedes SP13756

  Download sp13991.exe  


Readme

SOFTPAQ NUMBER:  SP13991
PART NUMBER:  N/A
FILE NAME:  686J4.CAB
TITLE:  Professional Workstation AP550 and SP750 ROM Image for Remote ROM Flash 
VERSION:  686J4_v2.13
LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Workstations

PRODUCTS AFFECTED:  Compaq Professional Workstation AP550 and SP750
		    
OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  June 1, 2000

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  4.x

PREREQUISITE:  Remote Management Setup or System Software Manager (SSM)

SUPERSEDES:  SP13756

DESCRIPTION:  Creates a cabinet file that contains a binary image for the 
v2.13 System ROM in the Professional Workstation AP550 and SP750.  The CAB 
file is used by Remote Management Setup or System Software Manager (SSM) to 
flash the System ROM on target Workstations on a network.

Enhancements/Fixes:
	
- Corrects a condition that was not allowing the Targa 3000 video solution to be 
  configured properly.
- Corrects a condition that was not allowing the system to boot from a floppy disk if
  an LS-120 drive was configured as the primary floppy device.
- Corrects a condition that was not allowing DPT Array controllers and embedded SCSI 
  and IDE solutions to interact properly.
- Added support for Intel Zeon processor stepping change A1. 


HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive. The file downloaded 
is a self-extracting executable.

2. If using Remote Management Setup, execute the downloaded file and follow the
on-screen instructions.  The name of the extracted file is 686J4.CAB.  If you are 
using System Software Manager (SSM), then place the entire executable into the SSM
filestore.

3. Refer to the Remote Management Setup documentation or the System Software Manager
documentation for instructions on creating a Remote ROM Flash job to flash the ROM 
on target Workstations across the network.

Copyright 2000, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home