SOFTPAQ NUMBER:  SP13986
PART NUMBER:  N/A
FILE NAME:    N/A
TITLE:  Professional Workstation AP400/AP500 Flash Recovery ROMPaq
VERSION:  686W5_071099 Rev A
LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Workstations

PRODUCTS AFFECTED:  Compaq Professional Workstation AP400 and
		    Compaq Professional Workstation AP500

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  April 17, 2000

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP13983

DESCRIPTION:  Creates the Flash Recovery ROMPaq Firmware Diskette for the 
Compaq Professional Workstation AP400 and AP500.  The flash recovery diskette 
is used when the System ROM is corrupt and a normal ROMPaq diskette will 
not work because no video is available.  The flash recovery ROMPaq 
overcomes this situation by using a combination of system beeps and 
system LEDs to communicate with the user.  The diskette contains an image 
of the 07-10-99 AP400/AP500 System ROM. 


Enhancements/Fixes:
   
- Corrects a condition that was not allowing the system to boot from a bootable 
  CDR media disk if it was inserted into a CDR drive.
 

HOW TO USE:

1. Obtain a formatted 1.44-MB diskette.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskette in a drive to create the diskette.

4. After the diskette has been created, you may delete the  
SoftPaq file downloaded in step 2.

5. Detailed instructions on how to use the flash recovery diskette are 
in a README.TXT file located on the flash diskette.

Copyright 2000 Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.