PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP13753

SP13753 — Professional Workstation SP700 System User ROMPaq

SoftPaq Number SP13753
Filename sp13753.exe
Size 475K
Date February 1, 2000
Version 686W6_071199 Rev A
Operating System All
Products Affected Compaq Professional Workstation SP700
Supersedes SP13751

  Download sp13753.exe  


Readme

SOFTPAQ NUMBER:  SP13753
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Professional Workstation SP700 System User ROMPaq
VERSION:  686W6_071199 Rev A
LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Workstations

PRODUCTS AFFECTED: Compaq Professional Workstation SP700
		    	
OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  February 1, 2000

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP13751

DESCRIPTION:  Creates the ROMPaq Firmware Upgrade Diskette for the 
Compaq Professional Workstation SP700, which allows a user to 
upgrade the System ROM to the 07/11/99 version.

Enhancements/Fixes:
   NOTE: This SoftPaq is identical to the previous release of this ROM version (SP12871).  It 
   provides the same Enhancements and Fixes.  It is being re-released under this new 
   SoftPaq number because of an internal problem with the way the previous SoftPaq (SP12871) 
   bootable disk was built.  Please use only this SoftPaq number and not SP12871.
- Corrects a condition that was causing the system to lock up when using Compaq Array
  SCSI Controllers and Microsoft Windows 2000.
- Corrects a condition that would not allow the installation of Microsoft Windows 2000
  in ACPI mode if a Powerstorm 300 AGP video card was in the system.
 

HOW TO USE:

1. Obtain a formatted 1.44-MB diskette.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskette in a drive to create the diskette.

4. After the diskette has been created, you may delete the  
SoftPaq file downloaded in step 2.

5. Keeping the newly created diskette in the A: drive, cycle 
system power to boot from the ROMPaq diskette.

6. Follow the on-screen instructions to upgrade the System ROM.

WARNING: DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING 
THE UPGRADE PROCESS!!!!

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home