| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP13747 — Professional Workstation AP400/AP500 ROMPaq Upgrade
| SoftPaq Number |
SP13747 |
| Filename |
sp13747.exe |
| Size |
821K |
| Date |
October 25, 1999 |
| Version |
686W5_070599 Rev A |
| Operating System |
All |
| Products Affected |
Compaq Professional Workstation AP400 and Compaq Professional Workstation AP500 |
| Supersedes |
SP13745 |
Readme
SOFTPAQ NUMBER: SP13747
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Professional Workstation AP400/AP500 ROMPaq Upgrade
VERSION: 686W5_070599 Rev A
LANGUAGE: English
CATEGORY: ROMPaqs
DIVISIONS: Workstations
PRODUCTS AFFECTED: Compaq Professional Workstation AP400 and
Compaq Professional Workstation AP500
OPERATING SYSTEM: N/A
SYSTEM CONFIGURATION: N/A
PREREQUISITES: N/A
EFFECTIVE DATE: October 25, 1999
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 2.x
SUPERSEDES: SP13745
DESCRIPTION: Creates the ROMPaq Firmware Upgrade Diskette for the
Compaq Professional Workstation AP400/AP500, which allows a user to
upgrade the System ROM to the 07/05/99 version.
Enhancements/Fixes:
NOTE: This SoftPaq is identical to the previous release of this ROM version (SP11509). It
provides the same Enhancements and Fixes. It is being re-released under this new
SoftPaq number because of an internal problem with the way the previous SoftPaq (SP11509)
bootable disk was built. Please use only this SoftPaq number and not SP11509.
- Features new microcode patches for the Pentium III processors.
- Corrects a condition that was causing the system to hang at POST
if any Matrox DigiSuite video editing cards were installed.
HOW TO USE:
1. Obtain a formatted 1.44-MB diskette.
2. Download the SoftPaq to a directory on your hard drive and change
to that directory. The file that is downloaded is an executable with
a filename based on the SoftPaq Number above.
3. From that drive and directory, execute the downloaded file
and follow the on-screen instructions. You will be prompted to
insert the formatted diskette in a drive to create the diskette.
4. After the diskette has been created, you may delete the
SoftPaq file downloaded in step 2.
5. Keeping the newly created diskette in the A: drive, cycle
system power to boot from the ROMPaq diskette.
6. Follow the on-screen instructions to upgrade the System ROM.
WARNING: DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING
THE UPGRADE PROCESS!!!!
Copyright 1999, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|