PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP13745

SP13745 — Professional Workstation AP400/AP500 ROMPaq Upgrade

SoftPaq Number SP13745
Filename sp13745.exe
Size 417K
Date July 27, 1999
Version 686W5_070299 Rev A
Operating System All
Products Affected Compaq Professional Workstation AP400 and Compaq Professional Workstation AP500
Supersedes SP13743

  Download sp13745.exe  


Readme

SOFTPAQ NUMBER:  SP13745
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Professional Workstation AP400/AP500 ROMPaq Upgrade 
VERSION:  686W5_070299 Rev A
LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Workstations

PRODUCTS AFFECTED:  Compaq Professional Workstation AP400 and
		        Compaq Professional Workstation AP500

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  July 27, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP13743

DESCRIPTION:  Creates the ROMPaq Firmware Upgrade Diskette for the 
Compaq Professional Workstation AP400/AP500, which allows a user to 
upgrade the System ROM to the 07/02/99 version.

Enhancements/Fixes:
   NOTE: This SoftPaq is identical to the previous release of this ROM version (SP10852).  It 
   provides the same Enhancements and Fixes.  It is being re-released under this new SoftPaq 
   number because of an internal problem with the way the previous SoftPaq (SP10852) bootable disk 
   was built.  Please use only this SoftPaq number and not SP10852.
- Features new microcode patches for the Pentium III processors.
- Corrects a condition that was causing the system to hang at POST 
  if an MKE DVD drive was installed.


HOW TO USE:

1. Obtain a formatted 1.44-MB diskette.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskette in a drive to create the diskette.

4. After the diskette has been created, you may delete the  
SoftPaq file downloaded in step 2.

5. Keeping the newly created diskette in the A: drive, cycle 
system power to boot from the ROMPaq diskette.

6. Follow the on-screen instructions to upgrade the System ROM.

WARNING: DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING 
THE UPGRADE PROCESS!!!!

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home