| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP13744 — Professional Workstation AP400/AP500 Flash Recovery ROMPaq
| SoftPaq Number |
SP13744 |
| Filename |
sp13744.exe |
| Size |
619K |
| Date |
June 30, 1999 |
| Version |
686W5_062299 Rev A |
| Operating System |
All |
| Products Affected |
Compaq Professional Workstation AP400 and Compaq Professional Workstation AP500 |
| Supersedes |
SP10187 |
Readme
SOFTPAQ NUMBER: SP13744
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Professional Workstation AP400/AP500 Flash Recovery ROMPaq
VERSION: 686W5_062299 Rev A
LANGUAGE: English
CATEGORY: ROMPaqs
DIVISIONS: Workstations
PRODUCTS AFFECTED: Compaq Professional Workstation AP400 and
Compaq Professional Workstation AP500
OPERATING SYSTEM: N/A
SYSTEM CONFIGURATION: N/A
PREREQUISITES: N/A
EFFECTIVE DATE: June 30, 1999
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 2.x
SUPERSEDES: SP10187
DESCRIPTION: Creates the Flash Recovery ROMPaq Firmware Diskette for the
Compaq Professional Workstation AP400 and AP500. The flash recovery diskette
is used when the System ROM is corrupt and a normal ROMPaq diskette will
not work because no video is available. The flash recovery ROMPaq
overcomes this situation by using a combination of system beeps and
system LEDs to communicate with the user. The diskette contains an image
of the 06-22-99 AP400/AP500 System ROM.
Enhancements/Fixes:
NOTE: This SoftPaq is identical to the previous release of this ROM version (SP10839). It
provides the same Enhancements and Fixes. It is being re-released under this new
SoftPaq number because of an internal problem with the way the previous SoftPaq
(SP10839) bootable disk was built. Please use only this SoftPaq number and not SP10839.
- Corrects a condition that caused an incorrect calculation of the checksum
for the Embedded SCSI Option ROM.
HOW TO USE:
1. Obtain a formatted 1.44-MB diskette.
2. Download the SoftPaq to a directory on your hard drive and change
to that directory. The file that is downloaded is an executable with
a filename based on the SoftPaq Number above.
3. From that drive and directory, execute the downloaded file
and follow the on-screen instructions. You will be prompted to
insert the formatted diskette in a drive to create the diskette.
4. After the diskette has been created, you may delete the
SoftPaq file downloaded in step 2.
5. Detailed instructions on how to use the flash recovery diskette are
in a README.TXT file located on the flash diskette.
Copyright 1999, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|