PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP13743

SP13743 — Professional Workstation AP400/AP500 ROMPaq Upgrade

SoftPaq Number SP13743
Filename sp13743.exe
Size 415K
Date June 30, 1999
Version 686W5_062299 Rev A
Operating System All
Products Affected Compaq Professional Workstation AP400 and Compaq Professional Workstation AP500
Supersedes SP10186

  Download sp13743.exe  


Readme

SOFTPAQ NUMBER:  SP13743
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Professional Workstation AP400/AP500 ROMPaq Upgrade 
VERSION:  686W5_062299 Rev A
LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Workstations

PRODUCTS AFFECTED:  Compaq Professional Workstation AP400 and
		        Compaq Professional Workstation AP500

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  June 30, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP10186

DESCRIPTION:  Creates the ROMPaq Firmware Upgrade Diskette for the 
Compaq Professional Workstation AP400/AP500, which allows a user to 
upgrade the System ROM to the 06/22/99 version.

Enhancements/Fixes:
NOTE: This SoftPaq is identical to the previous release of this ROM version (SP10838).  It 
      provides the same Enhancements and Fixes.  It is being re-released under this new SoftPaq 
      number because of an internal problem with the way the previous SoftPaq (SP10838) 
      bootable disk was built.  Please use only this SoftPaq number and not SP10838.
- Corrects a condition that caused an incorrect calculation of the checksum
  for the Embedded SCSI Option ROM.


HOW TO USE:

1. Obtain a formatted 1.44-MB diskette.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskette in a drive to create the diskette.

4. After the diskette has been created, you may delete the  
SoftPaq file downloaded in step 2.

5. Keeping the newly created diskette in the A: drive, cycle 
system power to boot from the ROMPaq diskette.

6. Follow the on-screen instructions to upgrade the System ROM.

WARNING: DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING 
THE UPGRADE PROCESS!!!!

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home