Softpaq Solution:  SP1368
File Name: 182820US._01, 182820US._02, 182820US._03
Title:  Compaq System Configuration Utility (3.5")
Version:  2.28 Rev.B
	
CATEGORY:  Diagnostics/Setup

EFFECTIVE DATE:  01-Sept-1995

PRODUCTS AFFECTED:                         
                                           
ProSignia            ProSignia VS          ProSignia 300
Systempro            Systempro/E           ProSignia 500
Systempro/LT         Systempro/XL          ProLiant 1000
Deskpro/M Family     Deskpro/XL Family     ProLiant 1500
Portable 486's       Deskpro/L Family      ProLiant 2000/4000
Rack-Mountable ProLiant Servers            ProLiant 4500

OPERATING SYSTEM:  not applicable

SYSTEM CONFIGURATION:  not applicable

SUPERSEDES: SP1263, 1264

DESCRIPTION:  System Configuration utility supports all currently shipping 
Systems Division server products. It is installed on the System Partition for
those systems which support it and have hard drives. It is shipped as 
diskette(s) on all other products.

This version of the Compaq Configuration Utility adds support for SmartStart 
CD-ROM v2.40, new products/options, fixes minor problems, and provides 
enhancements to version 2.28 revision A.

NEW ENHANCEMENTS -
   * Add support for 133Mhz PCI system processor option board.

PROBLEMS FIXED -
   * Display the bridge warning panel only if there is a DEC bridge device 
     installed with a CMC processor in ProSignia 300, ProSignia 500 and
     ProLiant 1500.
   * Correct an error in formatting the backup diskette of system partition.
   * Fix a hanging bug which sent CF into an endless loop on multi-function
     boards if it is the last in the list of PCI devices.

HOW TO USE:
1.  Obtain three (3) formatted 1.44 MB 3.5" diskettes.

2.  Download the SoftPaq to a directory on your hard drive and change to that 
    directory.  The file that is downloaded is SP1368.EXE.

3.  From that drive and directory, execute the SoftPaq file:
    SP1368 [ENTER]

    You will be prompted to place the formatted 1.44 MB diskette into a 
    diskette drive to create the diskette.

    Follow the instructions on the screen to create the diskettes. Be sure to 
    label each diskette exactly as it is shown on the screen for later 
    reference.

DISK #1 -- Self booting diskette contains CF.EXE and its associated 
    executable files.
DISK #2 -- This disk is not self-bootable. It includes many configurable
    CFG files for Deskpro/XL,ProSignia and ProSignia VS,Systempro/XL and
    ProLiant 1000/2000/4000 or newer products.
DISK #3 -- This disk is not self-bootable. Configurable CFG files in this
    diskette support only for Systempro, Systempro/E, Systempro/LT,
    Deskpro/L family, Deskpro/M family and Portable 486 family products.

4.  After all 3 diskettes are created, you may delete the downloaded 
    file SP1368.EXE if you wish.


HOW TO INSTALL THE SOFTWARE:  
1.  Insert diskette #1 (the disk has "Use this Disk First" label) in drive A: 
    and reboot the computer.

2.  Follow the prompted instructions on screen to complete the configuration
    process.

(c) Copyright 1995, Compaq Computer Corporation.  All rights reserved.
Product names mentioned herein may be trademarks and/or registered trademarks 
of their respective companies.