SOFTPAQ NUMBER:  SP13665
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Insight Manager Agents - SCO UnixWare 7 NonStop Clusters  
VERSION:  4.70
LANGUAGE:  English 

CATEGORY:  Software Solutions 

DIVISIONS:  Systems

PRODUCTS AFFECTED:  Compaq Servers running SCO UnixWare 7
		    
OPERATING SYSTEM:   SCO UnixWare 7.1.1
		   
SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  - Compaq Enhanced Feature Supplement (EFS) for 

                  SCO UnixWare 7, Version 7.34
		  The nsc package - Version 7.1.1
		
EFFECTIVE DATE:  May 1, 2000

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  4.x

SUPERSEDES: nsccim version 3.89.

DESCRIPTION:  Creates diskettes containing Compaq Insight Manager 
Agents -  SCO UnixWare 7 NonStop Clusters, Version 4.70.

IMPORTANT:  This softpac can be installed on the 7.1.1 or later
versions of SCO UnixWare 7 NonStop Clusters. It upgrades the 

version 3.89 CIM agents or installs an initial version of CIM Agents 

for SCO UnixWare 7 NonStop Clusters version 7.1.1.


HOW TO USE:

Perform steps 1-5 under DOS, Microsoft Windows 3.1, Windows95 or Windows NT. 

Perform steps 6-10 under SCO UnixWare 7 NonStop Clusters.

1. Obtain 5 IBM-formatted 1.44-MB diskettes.

2. Download the SoftPaq to a clean directory on your hard drive 

   and change to that directory.  The downloaded file is an executable 

   with a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
   and follow the on-screen instructions. Eight files will be created:
   SP13665.TXT, SP13665._01, SP13665._02, SP13665._03, SP13665._04,
   SP13665._05, sp13665.cva, and QRST5.EXE.

4. Execute QRST5.EXE and at the prompt, insert the formatted
   diskettes as prompted in the diskette drive to create the five diskettes 
   containing Compaq Insight Manager Agents - SCO UnixWare 7 NonStop Clusters, 

   Version 4.70.

  
   Label the diskettes with their numbered sequence.


   The first two diskettes contain cmafdtn, the Foundation Agents package.
   The third diskette contains cmanic, the Networking Agents package.
   The fourth diskette contains cmastor, the Storage Agents package.
   The fifth diskette contains cmasvr, the Server Agents package.

5. After the diskettes have been created, you can delete the  
   SoftPaq file downloaded in step 2 and the files unpacked in step 3.

6. To install the Compaq Insight Manager Agents - SCO UnixWare 7 NonStop 

   Clusters, log into your cluster as root.

 
7. Ensure that the EFS drivers are version 7.34 or higher by

   issuing one of the following commands : 

      For Compaq Health Driver Update, enter

      # pkginfo -l ptfcpqw
     

    or

      For Compaq Health Driver Update, enter

      # pkginfo -l ptfcrom
      

8. Insert the first newly created diskette into the cluster's default diskette
   drive and execute the following commands:

        pkgadd -d diskette1 cmafdtn


	Insert the second disk when prompted.

      Insert the third floppy diskette, and enter:


        pkgadd -d diskette1 cmanic

      Insert the fourth floppy diskette, and enter:


        pkgadd -d diskette1 cmastor

      Insert the last floppy diskette, and enter:


        pkgadd -d diskette1 cmasvr


   Follow the on-screen instructions.

9. Remove the last of the five diskettes.

----------Notes-------------------------------------------------
ASR Notes:  



The Automated Server Recovery feature is not currently 
supported by SCO UnixWare 7 NonStop Clusters. The CIM AutoRecovery 

Window will show the feature as "Not Available."  



Do not install the EFS ptfcpqasr package. Uninstall the ptfcpqasr 

package if it has been previously installed.

Power Management Notes: 



The nscupsd UPS control daemon is not included in this softpac.  

The feature is available on version 1.2 of the ProLiant Clusters 

for SCO Unixware 7 Cluster Enhancements CD-ROM.

Other Notes:



Occasionally, not all daemons on all nodes will start properly
upon initial installation.  If this situation occurs, either 
reboot the cluster, or enter the following commands:


  onall /etc/init.d/cpqsnmp stop


Wait five minutes, then enter



  onall /etc/init.d/snmp_node stop


Wait one hour, then enter:


  onall /etc/init.d/cpqsnmp start



Agent startup may take up to 15 minutes when a node is rebooted. 

Agent startup may take up to 10 minutes per node at CIM installation. 

/etc/init.d/cpqsnmp start/stop performs the operation in the background. 

Use /etc/init.d/cpqsnmp start_for/stop_for <NODE> to operate on a 

   specific node. 

------------------------------------------------------------------

Copyright 2000 Compaq Computer Corporation. 

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies.