Softpaq Solution:  SP1363
Part Number:  196328-409
Title:  Compaq Personal Computer Diagnostics/SETUP
Version:  10.06 Rev E

NOTE:  If you are using Compaq Diagnostics on a Compaq ISA Platform, SP1364 is also required for configuring a platform with Compaq Diagnostics/SETUP.

CATEGORY:  Diagnostics/Setup

EFFECTIVE DATE:  12 October 1995

PRODUCTS AFFECTED:
Desktops               Portables
================================
Deskpro/M Family       Concerto
Deskpro/i Family       Contura Family
Deskpro XE Family      Contura Aero Family
Deskpro XE Family/NIC  Contura 400 Family
Deskpro XL Family      LTE Lite Family
Presario Family        LTE Elite
ProLinea Family        Portable 486/486c
ProLinea CDS Family    LTE 5000 Family

OPERATING SYSTEM:  not applicable

SYSTEM CONFIGURATION: not applicable

SUPERSEDES: SP1245, SP1201, SP1150, SP1094

DESCRIPTION:
Compaq Personal Computer Diagnostics resides on two 1.44 MB floppy diskettes.  One is the Diagnostics/SETUP diskette (this SoftPaq).  The other is the Diagnostics/TEST diskette (SP1364).

The Diagnostics supports ALL currently shipping personal computer (non-server) products.  It is installed on the Diagnostics Partition for those systems which support it and have hard drives.  It is shipped as diskette(s) on all other products.

A Compaq Personal Computer Diagnostics/TEST diskette contains programs that can:
- TEST both Compaq EISA and ISA machines from the Desktop and Portable Divisions.
- INSPECT (display machine config) both Compaq EISA and ISA machines from the Desktop and Portable Divisions.

A Compaq SETUP diskette contains programs that can:
- Configure Compaq ISA machines.

Program Updates:
- Removed video controller RAM test on LTE 5000.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change to that directory.  The file downloaded to your hard drive is SP1363.EXE.

2. Obtain one (1) formatted 1.44MB diskette and place it in one of your diskette drives.

3. Execute the SoftPaq file to create the diskette:  SP1363[ENTER]

4. After the diskette is created, you may delete the downloaded file SP1363.EXE if you wish.

5. To run Diagnostics/SETUP, power down your computer, place the Diagnostics/SETUP diskette in Drive A:, and power up your computer.