PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP13487

SP13487 — Armada Specific Models Diagnostics for Windows 2000

SoftPaq Number SP13487
Filename sp13487.exe
Size 4129K
Date February 15, 2000
Version 2.05 Rev. A
Operating System Windows 2000
Products Affected Compaq Armada E700 Series Compaq Armada M700 Series Compaq Armada E500 Series Compaq Armada V300 Series Compaq Armada M300 Series Compaq Armada 7800 Series Compaq Armada 7400 Series
Supersedes NONE

  Download sp13487.exe  


Readme

SOFTPAQ NUMBER:  SP13487
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Armada Specific Models Diagnostics for Windows 2000 
VERSION:  2.05 Rev. A 
LANGUAGE:  US English

CATEGORY:  Management

DIVISIONS:  Portables

PRODUCTS AFFECTED:  Compaq Armada E700 Series
		    Compaq Armada M700 Series
		    Compaq Armada E500 Series
		    Compaq Armada V300 Series
		    Compaq Armada M300 Series
		    Compaq Armada 7800 Series
		    Compaq Armada 7400 Series

OPERATING SYSTEM:  Microsoft Windows 2000

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  February 15, 2000

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  4.0

SUPERSEDES:  NONE

DESCRIPTION:  This Compaq Diagnostics for Windows 2000 is for the 
Armada Series notebooks listed above.  It is a utility that displays 
information about the hardware and software configuration and tests 
and analyzes the computer system to ensure it is operating properly.

ENHANCEMENST:  N/A 

FIXES:  N/A

NOTES:  Initial release

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

To create the three optional installation diskettes, run MAKEDISK.BAT and
follow on-screen instructions.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP
   where <path> is the drive and directory created in step 2
                      - or -
                   a diskette drive letter if using the optional 
                   installation diskettes

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

Copyright 2000, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies






PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home