| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP13310 — Armada Specific Models Rage LT Pro/Mobility Driver for Windows 2000.
| SoftPaq Number |
SP13310 |
| Filename |
sp13310.exe |
| Size |
3122K |
| Date |
March 25, 2000 |
| Version |
1.00 Rev. A Language: SE Swedish |
| Operating System |
Windows 2000 |
| Products Affected |
Compaq Armada E500 Series Compaq Armada E700 Series Compaq Armada M300 Series Compaq Armada M700 Series Compaq Armada V300 Series Compaq Armada 1750 Series Compaq Armada Prosigna 165 Compaq Armada Prosigna 170 Compaq Armada Prosigna 190 |
| Supersedes |
NONE |
Readme
SOFTPAQ NUMBER: SP13310
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Armada Specific Models Rage LT Pro/Mobility Driver for Windows 2000.
VERSION: 1.00 Rev. A
Language: SE Swedish
CATEGORY: Display
DIVISIONS: Portables
PRODUCTS AFFECTED: Compaq Armada E500 Series
Compaq Armada E700 Series
Compaq Armada M300 Series
Compaq Armada M700 Series
Compaq Armada V300 Series
Compaq Armada 1750 Series
Compaq Armada Prosigna 165
Compaq Armada Prosigna 170
Compaq Armada Prosigna 190
OPERATING SYSTEM: Microsoft Windows 2000
SYSTEM CONFIGURATION: N/A
PREREQUISITES: N/A
EFFECTIVE DATE: March 25, 2000
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 4.0
SUPERSEDES: NONE
DESCRIPTION: Unpacks the files needed to install the Armada Specific
Models Rage Mobility Driver for Windows 2000 for the models listed above
in PRODUCTS AFFECTED.
Enhancements/Fixes:
1. Accelerated video driver specifically designed for portable usage.
2. Enhanced Monitor detection and configuration(DDC support).
3. Enhanced D3D support.
4. Panning modes enabled.
5. 1400x1050 display modes included.
HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename
based on the SoftPaq Number above.
2. Execute the downloaded file and follow the on-screen instructions.
Entering "Y" to confirm the unpacking of files creates a new directory
folder in the download directory. All files are unpacked into this
newly created directory.
3. After the directory has been created, you may delete the
self-extracting file downloaded in step 1.
4. To install, run SETUP.EXE. For example, enter:
<path>\SETUP
where <path> is the drive and directory created in step 2
Follow the on-screen instructions.
5. After the installation is completed, you may delete the directory
created in step 2 if you wish.
Copyright 2000, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|