Softpaq Solution:  SP1323
File Name:  FLIPBRST.COM 
Title:  Fix PCI Video Cards in Deskpro/Prolinea 4xx/5xx
Version:  1.01

CATEGORY:  Software Solution / Desktops

EFFECTIVE DATE:  August 1, 1995

PRODUCTS AFFECTED:  Deskpro/Prolinea 4xx/5xx with PCI

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  Some non-Compaq PCI video cards

SUPERSEDES:  SP1315

DESCRIPTION:  FLIPBRST.COM is a program that reports the current state of PCI write burst enable flag in Deskpro/Prolinea 4xx/5xx computers and then switches to the opposite state. It changes a bit in CMOS, and only needs to be run once unless some action clears CMOS.  The actual reprogramming of the PCI write enable bit occurs during the next cold boot. 

This solution may help if you are experiencing difficulties getting a non-Compaq PCI video card working in a Deskpro/Prolinea 4xx/5xx.  PCI video controllers that FLIPBRST has been observed to make work are not capable of accepting PCI write bursts.  These include:
Tseng Labs ET4000/W32P
S3 Vision864

HOW TO USE:

1.  Download the SoftPaq to a directory on your hard drive and change to that directory.  The file that is downloaded is SP1323.EXE.

2.  From that drive and directory, execute the SoftPaq file:
SP1323 [ENTER]
The following files should be created:
FLIPBRST.COM 
FLIPBRST.DOC

3.  After the files are created, you may delete the downloaded file SP1323.EXE if you wish.

4.  Refer to FLIPBRST.DOC for instructions on running the software.

Copyright 1995, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies