SOFTPAQ NUMBER:  SP13147
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Server Support for Microsoft Windows NT 4.0
        (Remote Insight Board Drivers)
VERSION:  2.18 Rev A
LANGUAGE:  English

CATEGORY:  Drivers

DIVISIONS: Systems

PRODUCTS AFFECTED:  ProLiant 400,ProLiant 800,ProLiant 850R,ProLiant 1000,
 ProLiant 1200,ProLiant 1200R,ProLiant 1500,ProLiant 1500R,ProLiant 1600,
 ProLiant 1850R,ProLiant 2000,ProLiant 2500,ProLiant 2500R,ProLiant 3000,
 ProLiant 3000R,ProLiant 4000,ProLiant 4500,ProLiant 4500R,ProLiant 5000,
 ProLiant 5000R,ProLiant 5500,ProLiant 6000,ProLiant 6400R,ProLiant 6500,
 ProLiant 7000,ProLiant 8000,ProLiant 8500,ProLiant CL1850,ProLiant DL380,
 ProLiant ML350,ProLiant ML370,ProLiant ML530,ProSignia 300,ProSignia 500,
 ProSignia 720,ProSignia 740,Systempro,Systempro/e,Systempro/LT,Systempro/XL

OPERATING SYSTEM:  Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  N/A

PREREQUISITES: N/A

EFFECTIVE DATE:  1 June 2000

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP10805

DESCRIPTION:  This SoftPaq creates two files -- a description file and a
self-extracting executable file.  The self-extracting executable file 
contains Compaq Server Support for Microsoft Windows NT 4.0
that supports the following subsystems and features of Compaq Servers:
 
   Compaq Remote Insight Board Driver
   Compaq Remote Insight Board WAN Driver
   Compaq Server Support Installation Utility

Enhancements/Fixes:

Features in Compaq SSD for Windows NT 4.0 Version 2.18 Rev. A

The release of the Compaq Server Support for Microsoft Windows
NT 4.0 Version 2.18 Revision A primarily supports the following 
new products: 

	Compaq RAID LC2 Controller

Compaq 66MHz/64bit Dual Channel Wide Ultra3 SCSI Adapter 
Driver (ADPU160M.SYS) 

	Added the latest file from Adaptec.

Compaq Array Configuration Utility  (CPQACU.EXE) 

	Added support for the Compaq RAID LC2 Controller.

Compaq Integrated Smart Array/42xx Controllers Driver 
(CPQARRY2.SYS) 

	Updated the Compaq Integrated Smart Array/42xx 
        Controllers Driver to Version 4.4.0.0 to Version 
        4.03.02.00.
	Added support for the Compaq RAID LC2 Controller.

Compaq SCSI Controller Driver (CPQ32FS2.SYS) 

	Corrected an issue involving the Compaq CD 
        Storage System when ScsiExpressed is installed.

Compaq Server Support Setup for Microsoft Windows NT 4.0 
(SETUP.EXE, SETUPAPP.EXE)

	Added support for the Compaq RAID LC2 Controller

Compaq System Management Driver (SYSMGMT.SYS, SYSDOWN.EXE) 

	Updated Version to 3.30.01.
	Added support to shut down the system if critical 
        fans are removed after the Power On Self Test (POST) 
        completes but before the System Management driver loads.  
        This replaces the support added in Version 3.24.01 of 
        the driver.  This change affects the following Compaq 
        servers:

		ProLiant DL580
 		ProLiant ML570
		ProLiant ML530
		ProLiant DL380
		ProLiant DL360
		ProLiant ML370
		ProLiant ML350
		ProLiant ML330
		ProLiant CL380
		ProLiant 6400R
		ProLiant 6500 (Pentium II Xeon or later 
		               models with the P11 ROM)
		ProLiant 5500 (Pentium II or later models 
		               with the P12 ROM)
		ProLiant 3000 (Pentium II or later models 
			       with the P09 ROM)
		ProLiant 1850R
		ProLiant 1600 (Pentium II or later models 
   			       with the P08 ROM)
		ProLiant 800  (Pentium II or later models 
			       with the P14 or P18 ROM)
		ProLiant 400
		Prosignia Server 740
		Prosignia Server 720			

For details, refer to NTREADME.HLP in the created support files.
 
HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for 
the files, or default to the download directory.
The following files will be created:
       README.TXT
       RIB.EXE

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
self-extracting executable:
       RIB.EXE [ENTER]

5. Follow the instructions on the screen to extract (unzip) the support 
software files to a folder on your hard drive and run the program 
SETUP.EXE to install the software.


Copyright 2000, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.