SOFTPAQ NUMBER: SP13031

PART NUMBER: 213105-003
PART NUMBER: 213138-003
PART NUMBER: 213139-003
PART NUMBER: 213140-003

FILE NAME: N/A

TITLE: Compaq Solaris Driver Update (DU) Diskette for Solaris 2.6

VERSION: 1.40

LANGUAGE: English

CATEGORY: Drivers

DIVISIONS: Systems

PRODUCTS AFFECTED:

ProSignia 200,  ProSignia 300,  ProSignia 500,  ProLiant 800, 
ProLiant 850R,  ProLiant 1000,  ProLiant 1200,  ProLiant 1500,
ProLiant 1600,  ProLiant 1850R, ProLiant 2000,  ProLiant 2500, 
ProLiant 3000,  ProLiant 4000,  ProLiant 4500,  ProLiant 5000, 
ProLiant 5500,  ProLiant 6000,  ProLiant 6400R, ProLiant 6500,
ProLiant 7000,  ProLiant ML530, ProLiant ML370, ProLiant DL380
ProLiant ML570, ProLiant DL580

OPERATING SYSTEM: Solaris 2.6 Intel Platform Edition

SYSTEM CONFIGURATION: Above operating system.

PREREQUISITES: N/A

EFFECTIVE DATE: March 23, 2001

ELECTRONIC DISTRIBUTION ALLOWED: YES

SOFTPAQ UTILITY VERSION: 2.x

SUPERSEDES: SP13030

DESCRIPTION:

This Softpaq creates Compaq Solaris Driver Update (DU)  Diskettes  for
Compaq SCSI, Smart  Array, Fibre  Channel and Compaq Second Generation
Array Controllers for Solaris 2.6 Intel Platform Edition.

CHANGES FROM PREVIOUS RELEASE:

Compaq Second Generation Array Controller Driver 'cpqary2' v1.30 fixes
the following problems.

1. Failure to dump the core after a system crash.
2. Incorrect reporting of drive geometry.

NOTE : Compaq Second Generation Array Controller Driver 'cpqary2' v1.30
is incompatible with earlier versions, because 'cpqary2' v1.30  reports
different geometry from that reported by earlier versions of 'cpqary2'.

'cpqary2' v1.10 reports incorrect size for logical volumes of size 64GB
and greater.

WARNING

Because  of this incompatibility,  upgrading  to 'cpqary2' v1.30  should
not be attempted. Data loss may occur with an upgrade. It is recommended
that the user back up all the  data and re-install the system  using the
new version v1.30 of 'cpqary2'.

HOW TO USE:

1. Download  the  Softpaq to an  empty  directory on your  hard  drive
   and change  to that directory.   The file  that  is  downloaded  is
   SP13031.EXE.

2. From that drive and directory, execute the Softpaq
   file:
        SP13031 [ENTER]

   The following files should be created:

        QRST5.EXE
        213105US._01
        213105US._02
        213105US._03
        213105US._04
        SP13031.TXT

3. Obtain 4 formatted 1.44-MB diskettes.

4. To create the  Driver Update (DU)  diskettes, run QRST5 and  follow
   the on-screen instructions.

5. After  the  Driver  Update  (DU)  diskettes are  created,  you  may
   delete the downloaded file SP13031.EXE and the other files  created
   on your hard drive if you wish.

6. Each of the Driver Update (DU) Diskette have the  following  Readme
   Files
   README.TXT - This file can be best viewed under  non-unix Operating
		System.
   ureadme    - This file can be best viewed under  Solaris  Operating
		System.
                Use the following commands to  view  ureadme  file  on
		Solaris Operating System.
		Check to see if Volume Management is running 
		# ps -ef | grep vold
		If Volume Management is running stop the same.
		# /etc/init.d/volmgt stop 
                Insert  the  Driver  Update  (DU)  diskette  into  the
		diskette drive.
                Mount the  Driver Update (DU)  diskette  at  the  /mnt
		mount point:
		# mount -F pcfs /dev/diskette  /mnt
		Move to /mnt mount point.
		# cd /mnt
                Use vi command to open the ureadme file.
		# vi ureadme
   These README.TXT and ureadme files on Driver Update (DU)  diskette,
   describes the procedure to load the Driver  Update  (DU)  diskette.

COMPAQ CONTROLLERS SUPPORTED:

The Compaq Solaris Driver Update(DU) Diskette contains  the  following
Device  Drivers and the Supported Hardware.

Compaq SCSI Controller driver, "cpqncr", version 3.60 supports the
following Compaq SCSI Controllers

*  Compaq 32-Bit Fast-Wide SCSI-2 EISA/PCI Controller (825)
*  Compaq Wide-Ultra SCSI PCI Controller (875)
*  Compaq Dual Channel Wide Ultra SCSI-3 Controller (876)
*  Compaq Dual Channel Ultra-2 SCSI Controller (896)
*  Compaq Integrated Dual Channel Wide Ultra-2 SCSI Controller

Compaq Smart Array Controller driver, "smartii", version 2.20 
supports the following Compaq Array Controllers

*  Compaq Smart Array 221 Controller
*  Compaq Smart Array 3200 Controller
*  Compaq Smart Array 3100ES Controller
*  Compaq Smart-2DH Array Controller
*  Compaq Smart-2SL Array Controller
*  Compaq Smart-2P Array Controller
*  Compaq Smart-2E Array Controller

Compaq Fibre Channel Controller driver, "cpqfcs", version 2.00 
supports the following Compaq Fibre Channel Controllers

*  Compaq Fibre Channel Storage System - EISA/PCI
*  Compaq 64-Bit/66-MHz Fibre Channel Storage System - PCI

Compaq Second Generation Array Controllers driver, "cpqary2",
version 1.30 supports the following Compaq Second Generation
Array Controllers

*  Compaq Integrated Smart Array Controller
*  Compaq Smart Array 4200 Controller
*  Compaq Smart Array 4250ES Controller
*  Compaq Smart Array 431 Controller

Copyright 2001, Compaq Computer Corporation.
All rights reserved.

Product names mentioned herein may be trademarks and/or
registered trademarks of  their  respective  companies.