SOFTPAQ NUMBER:  SP12959
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Management Agents for Portables
VERSION:  4.20 Rev. G 
LANGUAGE:  Swedish

CATEGORY:  Management

DIVISIONS:  Portables

PRODUCTS AFFECTED:  Compaq Armada E700 Series
		    Compaq Armada M700 Series
                    Compaq Armada E500 Series
                    Compaq Armada M300 Series
		    Compaq Armada V300 Series

OPERATING SYSTEM:  Microsoft Windows 95
		   Microsoft Windows 98
		   Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  January 27, 2000

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  4.0

SUPERSEDES:  SP11620

DESCRIPTION:
   This product provides local alerting, SNMP, and DMI agents for 
   Compaq Systems marketed as supporting Intelligent Manageability.  
   Local alerting notifies the user if the system temperature has been 
   exceeded under normal operating conditions, or an imminent drive 
   failure has been detected.  SNMP agents allow the system to be 
   managed by SNMP-compliant management applications such as Compaq 
   Insight Manager.  Desktop Management Interface (DMI) support 
   provides DMI 2.0 conformant and WfM 2.0 compliant agents that 
   allows the computer to be managed by DMI-compliant management 
   applications. 

Enhancements/Fixes:  

- Corrects a blue screen appearance after clicking the Boot 
  Security Tab in Security32 after installing Insight Manangement.
- Corrects the Port Security Tab of Security 32 from disappearing 
  after installing Insight Management.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

To create the three optional installation diskettes, run MAKEDISK.BAT and
follow on-screen instructions.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP
   where <path> is the drive and directory created in step 2
                      - or -
                   a diskette drive letter if using the optional 
                   installation diskettes

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

Copyright 2000, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies