| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP12943 — Compaq Communications Drivers for Armada 1500/1500c/1700/7800/7400
| SoftPaq Number |
SP12943 |
| Filename |
sp12943.exe |
| Size |
8525K |
| Date |
June 08, 2000 |
| Version |
2.00 Rev C |
| Operating System |
Windows 95, Windows 98, Windows NT 4.0, Windows 2000 |
| Products Affected |
Compaq Armada 1500 (Specific Models),Compaq Armada 1500c (Specific Models), Compaq Armada 1700 (Specific Models), Compaq Armada 7400 (Specific Models), Compaq Armada 7800 (Specific Models) |
| Supersedes |
Modem Drivers: SP12939, SP9619, SP9618, SP8394, SP8393, SP7447, SP6468 Mode Script Files: SP9449, SP6541, SP5831 |
Readme
SOFTPAQ NUMBER: SP12943
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Compaq Communications Drivers for Armada 1500/1500c/1700/7800/7400
VERSION: 2.00 Rev C
LANGUAGE: US English
CATEGORY: Drivers
DIVISIONS: Portables
PRODUCTS AFFECTED: Compaq Armada 1500 (Specific Models),Compaq Armada 1500c (Specific Models),
Compaq Armada 1700 (Specific Models), Compaq Armada 7400 (Specific Models), Compaq Armada 7800 (Specific Models)
OPERATING SYSTEM: Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT 4.0, Microsoft Windows 2000
SYSTEM CONFIGURATION: 56K(V.90) modem installed as standard equipment in above
Armada 1500c Series notebook models.
-OR-
56K(V.90) modem installed as standard equipment in Selecte
Armada 7400 or 7800 Series notebook models.
Controllerless modem only.
NOTE: This deliverable does not support Armada 7400 or 7800
models that shipped with Controller based modems.
-OR-
56VL Global Internal Modem installed as standard equipment
in the Armada 1700 Series notebook models.
-OR-
560cl Telephony Modem installed as standard equipment
in the Armada 1500 Series notebook models.
EFFECTIVE DATE: June 08, 2000
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: 4.x
SUPERSEDES: Modem Drivers: SP12939, SP9619, SP9618, SP8394, SP8393, SP7447, SP6468
Mode Script Files: SP9449, SP6541, SP5831
DESCRIPTION: Modem Drivers for the 56K (V.90), 56VL Global Internal or 560cl Telephony
Modems installed in specific Armada Series notebooks listed above. This softpaq provides
the files needed to install and configure the modem under Windows 95/98, NT 4.0 and Windows
2000.
Enhancements/Fixes:
- For Windows 9x and Windows NT 4.0, provides Version 1.6.66 modem driver software
for installation and upgrades.
- Fixed V.90 handshake sequence Problem in the field when calling some Ascend servers with
UUNET.
- Fixed Win 95 HCT 9.1 APM 1.2 Test kit issue with suspend/resume on Win 95.
- Improvement in connection speed on lines with random robbed bits. Previously the driver
limited the downstream speed to 41.33 kbits/sec.
- Improvement for lines with 0 dB and no robbed bits. The downstream speed is increased.
- Fixed V.90 problem in the field with some Cisco servers which are configured for no power
compensation.
- Turkey and Taiwan - Changed maximum number of call attempts parameter before blacklisting
from 2 to 3.
Note: These enhancements are Win2000 Specific. All non OS specific enhancements above apply.
- For Windows 2000, provides Version 1.6.66A modem driver software for installation
and upgrades.
- Maintenance Release Bundled with the 1.6.66a drivers & Win2000 support.
- Fixed Invalid country bug in W2K modem drivers that are included in the W2K shrink wrap.
When the modem is updated the correct default Country is set for the modem.
- Added modem to Add/Remove programs
- Fixed modem driver version issue which resulted in W2K reporting that the older modem drivers
being replaced were newer than the updated drivers.
- Fixed Win 2000 bug in the Win 2000 driver with AOL application during disconnect.
HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive and change
to that directory. The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.
2. From that drive and directory, execute the downloaded file
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for
the files, or default to the download directory.
3. After the files have been unpacked, you may delete the
self-extracting file downloaded in step 1.
4. To install, run SETUP.EXE from the drive and directory path chosen in
step 2. For example, use the task bar to select Start, then Run.
Enter:
<path>\SETUP (i.e. C:\TEMP\SETUP)
Select OK and follow on-screen instructions.
5. After a successful installation, the files unpacked in step 2 may be
deleted if you wish.
Copyright 2000, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|