SOFTPAQ NUMBER:  SP12821
PART NUMBER:  159184-001
FILE NAME:  N/A
TITLE:  Presario 1200 Specific Models System ROM Update 
VERSION:  F.14 (12/23/99)
LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Consumer

PRODUCTS AFFECTED:  Compaq Presario 1246, 1247, 1277, 1278, 1279, 1200-XL101, 
                    1200-XL102, 1200-XL103, 1200-XL104, 1200-XL105, 1200-XL106, 
                    1200-XL107, 1200-XL108, 1200-XL109, 1200-XL110, 1200-XL111, 
                    1200-XL112, 1200-XL113, 1200-XL114, 1200-XL115, 1200-XL118,
                    and 1200-XL119

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  January 19, 2000

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.0

SUPERSEDES:  SP12128

DESCRIPTION:  Creates a bootable diskette to update the System ROM 
to the 12/23/99 version on the Presario 1200 Series notebook models listed 
above.

Enhancements/Fixes:

 -  Added changes that improve the life of NiMH batteries.
 -  Fixed a problem where the battery gauge would incorrectly 
    show 0% under certain conditions.
 -  Fixed a problem where a 128-megabyte SO-DIMM would be 
    incorrectly detected as 96 megabytes.
 -  Fixed an intermittent system lockup problem that would occur
    after adding or removing a SO-DIMM memory module.

HOW TO USE:

1.  Format a 1.44-MB diskette.

2.  Download the SoftPaq to a temporary, empty directory on your
    hard drive and change to that directory.  The file downloaded
    is a self-extracting executable with a filename based on the
    SoftPaq Number above.

3.  From that drive and directory, execute the SoftPaq file.
    You will be prompted to place the formatted 1.44 MB diskette
    into a diskette drive to create the ROMPaq diskette.

4.  After the diskette is created, you may delete the downloaded
    file if you wish.

5.  Shutdown and turn off the computer.  Wait 15 seconds.  Place the 
    ROMPaq diskette into drive A: and turn on the power, allowing the 
    computer to boot from the diskette.

6.  The ROMPaq diskette will automatically update the System ROM and 
    notify you when the update is finished.

    CAUTION:  DO NOT TURN OFF YOUR COMPUTER DURING THE UPDATE PROCESS

7.  When the ROM update is finished, you will need to turn the computer 
    off and back on for the changes to be in effect.  Remove the ROMPaq 
    diskette from the computer.  Turn the computer's power switch OFF, 
    wait 15 seconds, then turn the switch ON again.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies