PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP12820

SP12820 — Presario 1900 Specific Models System ROM Update

SoftPaq Number SP12820
Filename sp12820.exe
Size 428K
Date January 17, 2000
Version RC06 (12/23/99)
Operating System All
Products Affected Compaq Presario 1900T, 1922, 1926, 1927, 1928, 1929, 1930, and 1931
Supersedes SP11911

  Download sp12820.exe  


Readme

SOFTPAQ NUMBER:  SP12820
PART NUMBER:  155236-002
FILE NAME:  N/A
TITLE:  Presario 1900 Specific Models System ROM Update 
VERSION:  RC06 (12/23/99)
LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Consumer

PRODUCTS AFFECTED:  Compaq Presario 1900T, 1922, 1926, 1927, 1928, 1929, 1930, and 1931

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  January 17, 2000

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.0

SUPERSEDES:  SP11911

DESCRIPTION:  Creates a bootable diskette to update the System ROM 
to the 12/23/99 version on the Presario 1900 Series notebook models listed 
above.

Enhancements/Fixes:
 
 -  Updates the System ID information checked by Microsoft Windows 2000 to 
    allow installation of Windows 2000 with ACPI (Advanced Configuration and 
    Power Interface) support.
 -  Fixes issue where the Fn+F3 hot key did not work in Windows ACPI mode. 
 -  Allows audio CD to spin down when the user requests Standby.

HOW TO USE:

1.  Format a 1.44-MB diskette.

2.  Download the SoftPaq to a temporary, empty directory on your
    hard drive and change to that directory.  The file downloaded
    is a self-extracting executable with a filename based on the
    SoftPaq Number above.

3.  From that drive and directory, execute the SoftPaq file.
    You will be prompted to place the formatted 1.44 MB diskette
    into a diskette drive to create the ROMPaq diskette.

4.  After the diskette is created, you may delete the downloaded
    file if you wish.

5.  Shutdown and turn off the computer.  Wait 15 seconds.  Place the 
    ROMPaq diskette into drive A: and turn on the power, allowing the 
    computer to boot from the diskette.

6.  The ROMPaq diskette will automatically update the System ROM and 
    notify you when the update is finished.

    CAUTION:  DO NOT TURN OFF YOUR COMPUTER DURING THE UPDATE PROCESS

7.  When the ROM update is finished, you will need to turn the computer 
    off and back on for the changes to be in effect.  Remove the ROMPaq 
    diskette from the computer.  Turn the computer's power switch OFF, 
    wait 15 seconds, then turn the switch ON again.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies


PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home