PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP12809

SP12809 — Compaq Server Agents for NetWare (Japanese)

SoftPaq Number SP12809
Filename sp12809.exe
Size 421K
Date January 24, 2000
Version 4.60 Rev A
Operating System Novell NetWare, Novell NetWare 4.x, Novell Netware 5 (Japanese)
Products Affected Compaq ProLiant, ProSignia and SystemPro Servers
Supersedes SP12227

  Download sp12809.exe  


Readme

SOFTPAQ NUMBER:  SP12809
PART NUMBER:  N/A
FILE NAME:  NWSV460.EXE
TITLE:  Compaq Server Agents for NetWare (Japanese)
VERSION:  4.60 Rev A
LANGUAGE:  Japanese

CATEGORY:  Software Solutions

DIVISIONS:  Systems

PRODUCTS AFFECTED:  Compaq ProLiant, ProSignia and SystemPro Servers

OPERATING SYSTEM:  Novell NetWare 3.2J (Japanese)
		   Novell NetWare 4.x and intraNetWare (Japanese)
		   Novell Netware 5 (Japanese)

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  This requires the Compaq NSSD drivers to be installed.

EFFECTIVE DATE:  January 24, 2000

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  SP12227

DESCRIPTION:  This SoftPaq is for Japanese products, and cannot be run 
in United States mode.  This SoftPaq creates two files -- a description
file and a self-extracting executable file.  The self-extracting executable 
file contains Compaq Server Agents for NetWare Version 4.60 (Japanese).

Enhancements/Fixes:

   Added support for the Compaq ProLiant ML350
   Added support for the Compaq ProLiant ML370
   Added support for the Compaq ProLiant DL380
   Added support for the Compaq Remote Insight Lights-Out Edition

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for 
the files, or default to the download directory.
The following files will be created:
       README.TXT
       NWSV460.EXE

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
self-extracting executable:
       NWSV460.EXE [ENTER]

5. For installation instructions, refer to a README.TXT file.

Copyright 2000, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies.



PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home