SOFTPAQ NUMBER:  SP12800
PART NUMBER:  127755-295, 127756-295, 127757-295, 127758-295, 127759-295,
              127760-295, 127761-295
FILE NAME:  NSSD
TITLE:	Japanese Novell Support Software Diskette (NSSD)
VERSION:  5.40 Rev A
LANGUAGE:   Japanese

CATEGORY:  Drivers

DIVISIONS:  Systems

PRODUCTS AFFECTED:  Compaq Server products

OPERATING SYSTEM:  Novell NetWare 3.2J
                   intraNetWare
                   intraNetWare SMP
                   NetWare 4.2
                   NetWare SFT-III
                   NetWare 5 (Japanese) 

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  January 24, 2000

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP12218

DESCRIPTION:  This SoftPaq is for Japanese products, and cannot be run 
in United States mode.  It creates seven diskettes.
The NSSD diskettes contain NetWare and intraNetWare drivers, NetWare 
Loadable Modules (NLMs), and support information to optimize the 
performance of NetWare and IntranetWare on Compaq servers.  
This software enhances the performance of Compaq options such as Compaq 
Drive Array controllers, Compaq 32-Bit SCSI-2 controllers, and Compaq 
CD-ROM drives.

Enhancements/Fixes:  

This release of the Support Software for Novell Products (NSSD) primarily
supports the following new products:
   
   -  Compaq ProLiant DL380
   -  Compaq ProLiant ML350  
   -  Compaq ProLiant ML370
   -  Compaq ProLiant ML530
   -  Compaq Smart Array 431 Controller
   -  Compaq StorageWorks 64-Bit/66-Mhz Fibre Host Bus Adapter
   -  Integrated Dual Channel Wide-Ultra2 SCSI Adapter

The following Compaq drivers were updated:

   CPQARRAY.HAM v2.06 - NSSD 5.40A
   -  Added support for the Compaq Smart Array 431 Controller.

   CPQFC.HAM v2.20 - NSSD 5.40A
   -  Added support for the Compaq StorageWorks 64-Bit/66-Mhz Fibre 
      Host Bus Adapter.

   CPQHLTH.NLM v4.30 - NSSD 5.40A
   -  Added support for the following new servers:
      *  Compaq ProLiant DL380
      *  Compaq ProLiant ML370
   -  Updated fan failure reporting to Compaq Insight Manager for the 
      Compaq ProLiant 7000 server. 
 
   CPQIML.NLM v1.06 - NSSD 5.40
   -  Added Novell Directory Services (NDS) login capability.
   -  Added a basic Help screen to explain the Test Internet Connection
      results.

   CPQMPK.PSM v.3.14 - NSSD 5.40
   -  Resynchronized with Novell PSM. 
   -  Modified CPQMPK.PSM to a prevent page fault if the PSM is prematurely
      unloaded either by the Operating System (OS) or incomplete 
      initialization.
   -  Added an enhancement to further validate the MPS table contents, 
      skipping processors with an invalid local APIC ID value.
   -  Modified CPQMPK.PSM to prevent lockups if APIC messages were to be
      sent to nonexistant targets.
   -  Added an enhancement to verify the existence of local APICs on 
      processors before accessing them.
   -  Modified CPQMPK.PSM to prevent lockups due to unexpected ISA 
      (edge triggered) interrupts taken during a real mode transiton. This 
      modification prevents the loss of an edge-triggered interrupt that
      could cause a device to slow down or hang.
   -  Added an enhancement that enables virtual wire mode for core dumps
      and prevents multiple simultaneous virtual wire mode routes which 
      could cause hangs during core dumps.
   -  Added an enhancement that restores the PIC state when quitting the OS
      from within the debugger.
   -  Added an enhancement that sets processor task priority registers once
      to create a priority "ladder" that urges MP-enabled interrupts away from
      P0 unless all other processors are in service.  P1 will tend to be the
      most busy processor servicing MP-enabled interrupts, followed by 
      P2, P3, etc. P0 will still service MP-enabled interrupts but on a less
      frequent basis.
   -  Added a fix so that the system will detect all hardware faults.
   
   CPQONLIN.NLM v2.43 - NSSD 5.40A
   -  Added support for the following new products:
      *  Compaq Smart Array 431 Controller
      *  Compaq StorageWorks 64-Bit/66-Mhz Fibre Host Bus Adapter

   CPQPOWER.NLM v1.04 - NSSD 5.40
   -  Modified the utility's behavior when the user abandons any changes
      made to the Power Down mode in the Power Down Manager window by 
      pressing ESC and responding Y.  In previous versions, the utility 
      would not restore the "X" to the correct location corresponding 
      to the original setting before the attempted change. 
   -  Modified messages for consistency and accuracy. 
   -  Disabled the F2 menu activation key. 
   -  Changed the refresh function from a menu item to a hot key using F3.  
      Added F3 hot key refresh to all data windows, including the dumb power
      supply screens. 
   -  Changed the F1 key-invoked Help text to match the functionality changes
      on all windows changed. 
 
   CPQSBD.NLM v2.18 - NSSD 5.40
   -  Modified the -DETECT option to report that the driver supports PCI
      hot plug on the Compaq ProLiant 6500. 

   CPQSCSI.HAM v1.39 - NSSD 5.40A
   -  Fixed a CPUHog ABEND issue that occurs on the Compaq ProLiant CL1850 
      during heavy network traffic.
   -  Fixed spurious interrupts with Compaq Smart Array controllers during 
      transition to real mode. 

Your suggestions and feedback are welcome at [email protected].

HOW TO USE

1. Obtain seven (7) formatted 1.44 MB diskettes.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3.  From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskettes in a drive to create the diskettes.

4.  After the diskettes have been created, you may delete the  
SoftPaq file downloaded in step 2.

5. For installation instructions, refer to READ1ST.RDM and WHATSNEW.RDM 
on the created diskettes.

Copyright 2000, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies.