| PaqPlace
For your Compaq |
Compaq SoftPaq Driver & Software Archive |
|
|
|
SP1250 — Compaq PCMCIA Support, Version 3.12
| SoftPaq Number |
SP1250 |
| Filename |
sp1250.exe |
| Size |
427K |
| Date |
07 December 87 |
| Version |
N/A |
| Operating System |
All |
Readme
Softpaq Solution: SP1250
File Name: P/N 140229-001
Title: Compaq PCMCIA Support
Version: 3.12
CATEGORY: Software Solutions / Laptop
EFFECTIVE DATE: 12 June 1995
PRODUCTS AFFECTED: Contura 400 Family and LTE Elite
OPERATING SYSTEM: MS-DOS 5.0 or greater, Microsoft Windows 3.1
SYSTEM CONFIGURATION: As per OPERATING SYSTEMS, above.
SUPERSEDES: SP1045 for LTE Elite and Contura 400 Family ONLY
DESCRIPTION: This will create the Compaq PCMCIA Support Diskette Version 3.12. Portable Computer Setup for Windows Version 3.00 (SP1246) is used in conjunction with these updated PCMCIA Drivers.
UPDATES:
Hibernation and Standby
- Avoids lockup when going into Hibernation with New Media modems and Berg SRAM PC card.
- Avoids lockup when returning from Standby with MODEM and SRAM present.
- Corrects system lockup when exiting Standby with TDK modems.
- Allows ATA cards to work after returning from Standby or Hibernation.
Card Specific
- Eliminates EMS conflict with ATA cards when RAM switch is used in EMM386.
General
- Upgraded Card and Socket services to CardSoft version 3.12 (supports PCMCIA v2.1).
- Allows file transfers between PCMCIA modems and drive A:.
Enhancement
Increased memory available, enhancing overall system performance.
HOW TO USE:
1. Obtain one formatted 1.44 MB diskette.
2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP1250.EXE.
3. From that drive and directory, execute the SoftPaq file:
SP1250 [ENTER]
You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to create the diskette.
4. After the diskette is created, you may delete the downloaded file SP1250.EXE if you wish.
5. Insert the diskette into the A: drive. From TabWorks or File Manager, select File, Run....
6. In the Command Line, type: A:\INSTALL [ENTER]
Copyright 1995, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.
PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
|
Home
|