PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP12219

SP12219 — Server Diagnostics (Japanese)

SoftPaq Number SP12219
Filename sp12219.exe
Size 1965K
Date November 08, 1999
Version 10.27J Rev A
Operating System All
Products Affected Compaq ProLiant, ProSignia and SystemPro Servers;
Supersedes SP11673

  Download sp12219.exe  


Readme

SOFTPAQ NUMBER:  SP12219
PART NUMBER:  386577-298, 386578-298
FILE NAME:  N/A
TITLE:  Server Diagnostics (Japanese)
VERSION:  10.27J Rev A
LANGUAGE:  Japanese

CATEGORY:  Diagnostics-Setup

DIVISIONS:  Systems

PRODUCTS AFFECTED:  Compaq ProLiant, ProSignia and SystemPro Servers;

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  November 08, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  SP11673

DESCRIPTION:  This SoftPaq is for Japanese products, and cannot be 
run in United States mode.  It creates two separate diskettes for the 
TEST utility and INSPECT utility (different from U.S. version of Server 
Diagnostics, which creates only one diskette).

Server Diagnostics support currently shipping Systems Division 
server products.  It is installed on the Diagnostics Partition 
for those systems which support it and have hard drives.  It is shipped 
as a diskette on all other products.

Enhancements/fixes:
 - Added identification of NICs via PCI IDs in Inspect.
 - Fixed problem of missing drives in both Test and Inspect on
   some array controllers on ProLiant 1600 and 3000 systems.
 - Refinement of ECC fault isolation support on some servers.
 - Resolved issue of testing into graphics memory space on some
   systems with 4GB of memory installed.
 - Fixed issue of ProLiant 8000 falsely booting into Disaster
   Recovery Mode after running Diagnostics.

HOW TO USE

1. Obtain two (2) formatted 1.44-MB diskettes.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskettes in a drive to create the diskettes.

4. After the diskettes have been created, you may delete the  
SoftPaq file downloaded in step 2.

5. For installation instructions, run README on the 1st created diskette.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies.



PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home