SOFTPAQ NUMBER:  SP12213
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Server Support for Microsoft Windows NT 3.51
        (Files rather than diskettes)
VERSION:  1.36 Rev A
LANGUAGE:  Japanese

CATEGORY:  Drivers

DIVISIONS:  Systems

PRODUCTS AFFECTED:  ProLiant 800, ProLiant 850R, ProLiant 1000,
ProLiant 1200, ProLiant 1200R, ProLiant 1500, ProLiant 1500R,
ProLiant 1600, ProLiant 1850R, ProLiant 2000, ProLiant 2500,
ProLiant 2500R,ProLiant 3000, ProLiant 3000R, ProLiant 4000,
ProLiant 4500, ProLiant 4500R, ProLiant 5000, ProLiant 5000R,
ProLiant 5500, ProLiant 6000, ProLiant 6400R, ProLiant 6500,
ProLiant 7000, ProSignia 300, ProSignia 500, Prosignia 740,
Systempro, Systempro/e, Systempro/LT, Systempro/XL

OPERATING SYSTEM:  Microsoft Windows NT 3.51

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  November 08, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP11007

DESCRIPTION:  This SoftPaq is for Japanese products, and cannot be run 
in United States mode. This SoftPaq creates two files -- a description 
file and a self-extracting executable file.  The self-extracting 
executable file contains Compaq Server Support for Microsoft Windows 
NT 3.51 that supports the following subsystems and features of 
Compaq Servers:

   ATI Rage IIC Graphics Controller
   Compaq Advanced Network Control Utility
   Compaq Ethernet, Fast Ethernet, or Gigabit Controllers
        Compaq NC1120 Ethernet NIC		
	Compaq NC3120 Fast Ethernet NIC 		
	Compaq NC3121 Fast Ethernet NIC 		
	Compaq NC3122 Fast Ethernet NIC 		
	Compaq NC3123 Fast Ethernet NIC 		
	Compaq NC3131 Fast Ethernet NIC		
	Compaq NC3132 Fast Ethernet Module		
	Compaq NC3133 Fast Ethernet Module		
	Compaq NC3160 Fast Ethernet NIC		
	Compaq NC3161 Fast Ethernet NIC		
	Compaq NC6132 Gigabit Module		
	Compaq NC6133 Gigabit Module		
	Compaq NC6134 Gigabit NIC		
   Compaq HAL Support (Uniprocessor and Multiprocessor)
   Compaq Integrated Management Display Utility
   Compaq Netelligent Controllers
   	Compaq Netelligent 10 T/2 PCI UTP/Coax Controller
    	Compaq Netelligent 10 T PCI UTP Controller
    	Compaq Netelligent 10/100 TX PCI UTP Controller
    	Compaq Netelligent Dual 10/100 TX PCI UTP Controller	
   Compaq NetFlex-3 Controllers
    	Compaq NetFlex-3/P Controller	
    	Compaq NetFlex-3/E Controller	
   Compaq Network Teaming and Configuration Utility
   Compaq ProLiant Storage System 
   Compaq Recovery Server, Standby Agent with SMART-2 Support
   Compaq Recovery Server, Online Agent with SMART-2 Support
   Compaq Remote Insight Board/PCI Driver
   Compaq Remote Insight Board/PCI WAN Driver
   Compaq SCSI Controllers
	Compaq Dual Channel Wide-Ultra SCSI-3 Controller	
        Compaq Wide-Ultra SCSI-3 Controller
        Compaq 32-Bit Fast-Wide SCSI-2/E Controller
      	Compaq 32-Bit Fast-SCSI-2 Controller
    	Integrated 32-Bit Fast-SCSI-2/P Controller	
    	Integrated 32-Bit Fast-Wide SCSI-2/P Controller
    	Integrated Wide-Ultra SCSI Controller
    	Compaq 32-Bit Fast-SCSI-2 Controller option board	
    	Compaq 32-Bit Fast-Wide SCSI-2/P Controller option board
	Compaq 32-Bit Fast-Wide SCSI-2/E Controller option board    	
	Compaq Wide-Ultra SCSI-3 Controller option board      
   Compaq SMART/SMART-2 Array Controllers
	Compaq SMART/IDA-2/IDA/IAES Controllers
	Compaq SMART-2/P and Compaq SMART-2/E Controllers
	Compaq SMART-2DH Controller
	Compaq SMART-2SL Controller 
   Compaq Smart Array Controllers
        Compaq Smart Array 3100ES Controller  
        Compaq Smart Array 3200 Controller
   Compaq Server Support Installation Utility
   Compaq System Management/Health Driver
   Compaq 66MHz/64bit Dual Channel Wide Ultra3 SCSI Adapter

Enhancements/Fixes:
Features in Compaq SSD for Windows NT 3.51 Version 1.36 Rev. A

The release of the Compaq Server Support for Microsoft Windows 
NT 3.51 Version 1.36 Revision A primarily supports the following 
new product:

	Compaq 66MHz/64bit Dual Channel Wide Ultra3 SCSI Adapter

Compaq Multiprocessor Hardware Abstraction Layer Compaq Multiprocessor 
MPS HAL(HALMPS.DLL) 
	Corrected a possible bugcheck (STOP 0xA) that may be encountered 
	when the server is rebooted.  The bugcheck would occur after 
	the system is shut down, but before the processors are reset.  
	This version of the HAL (Version 304.01) is the same version 
	that is available in SoftPaq 11637.

Compaq 66MHz/64bit Dual Channel Wide Ultra3 SCSI Adapter Driver(ADPU160M.SYS) 
	Created the Compaq 66MHz/64bit Dual Channel Wide Ultra3 SCSI Adapter 
	Driver to support the new Compaq 66MHz/64bit Dual Channel Wide 
	Ultra3 SCSI Adapter.

For details, refer to NTREADME.HLP in the created support files.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
   to that directory.  The file that is downloaded is a self-extracting
   executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
   and follow the on-screen instructions to unpack the files.
   The number of files to be created and total file size is displayed.
   You will be given the chance to specify the target directory for 
   the files, or default to the download directory.
   The following files will be created:
       README.TXT
       NTSSD.EXE

3. After the files have been created, you may delete the  
   self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
   self-extracting executable:
      NTSSD.EXE [ENTER]

5. Follow the instructions on the screen to extract (unzip) the
   support software files to a folder on your hard drive and run
   the program SETUP.EXE to install the software.


Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.