PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP12127

SP12127 — Armada Specific Models M2E Audio Driver for Windows NT 4.0

SoftPaq Number SP12127
Filename sp12127.exe
Size 1654K
Date November 3, 1999
Version 4.02.90 Rev D
Operating System Windows NT 4.0
Products Affected Compaq Armada E500 Series Compaq Armada V300 Series Compaq Armada E700 Series Compaq Armada M700 Series Compaq Armada M300 Series
Supersedes SP11091 for Armada E700, M700, and M300

  Download sp12127.exe  


Readme

SOFTPAQ NUMBER:  SP12127
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Armada Specific Models M2E Audio Driver for Windows NT 4.0 
VERSION:  4.02.90 Rev D 
LANGUAGE:  US English

CATEGORY:  Audio

DIVISIONS:  Portables

PRODUCTS AFFECTED:  Compaq Armada E500 Series
		    Compaq Armada V300 Series
		    Compaq Armada E700 Series
		    Compaq Armada M700 Series
		    Compaq Armada M300 Series

OPERATING SYSTEM: Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  November 3, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  4.0

SUPERSEDES:  SP11091 for Armada E700, M700, and M300

DESCRIPTION: Unpacks files needed to install the Armada Specific
Models M2E Audio Driver for Windows NT 4.0 for the models 
listed above in PRODUCTS AFFECTED.  Optionally creates  
two installation diskettes.

Enhancements/Fixes:  

- Added support for the ArmadaStation EM and Convenience Base EM.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

To create the optional installation diskettes, run MAKEDISK.BAT and
follow on-screen instructions.

3. After the directory has been created, you may delete the self-extracting
file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP
   where <path> is the drive and directory created in step 2
                      - or -
                   a diskette drive letter if using the optional 
                   installation diskettes

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies




PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home