PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP11920

SP11920 — Integrated 3Com Etherlink 3C905C 10/100 PCI NIC Driver

SoftPaq Number SP11920
Filename sp11920.exe
Size 3094K
Date November 1, 1999
Version 5.11 Rev A
Operating System Windows 95, Windows 98, Windows NT 4.0
Products Affected Compaq Armada E700 Series Compaq Armada M700 Series Compaq Armada E500 Series Compaq Armada V300 Series Compaq Armada M300 Series
Supersedes SP10948 for Armada E700, M700, M300

  Download sp11920.exe  


Readme

SOFTPAQ NUMBER:  SP11920
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE: Integrated 3Com Etherlink 3C905C 10/100 PCI NIC Driver
VERSION:  5.11 Rev A
LANGUAGE:  US English

CATEGORY:  Network

DIVISIONS:  Portables

PRODUCTS AFFECTED:  Compaq Armada E700 Series
		    Compaq Armada M700 Series
		    Compaq Armada E500 Series
		    Compaq Armada V300 Series
		    Compaq Armada M300 Series

OPERATING SYSTEM:   Microsoft Windows 95
		    Microsoft Windows 98
		    Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  The specified platforms docked with an Armada 
		       Station EM or Armada Convenience Base EM with 
		       integrated 3COM Etherlink 3C905C 10/100 PCI NIC.

PREREQUISITES:  N/A

EFFECTIVE DATE:  November 1, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  4.0

SUPERSEDES:  SP10948 for Armada E700, M700, M300

DESCRIPTION: This is the driver needed to install and configure the 
3Com Etherlink 3C905C 10/100 PCI NIC that is integrated into the
Armada Station EM and the Armada Convenience Base EM.  

Enhancements/Fixes:  
-  Released to meet Microsoft PC99 compliance requirements.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

To create the three optional installation diskettes, run MAKEDISK.BAT 
and follow on-screen instructions.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, refer to README.TXT on Disk 3 in the created directory.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

Copyright 2000, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies






PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home