• Provides the ability to disable trap editing on the SNMP status screen.
• Provides the ability to hide the taskbar icon
• Integrates with Compaq's System Software Manager(SSM).
• Adds support for Intel's processor serial number.
• Adds support for reporting USB hard drive, NIC, keyboard, and mouse devices.
• Adds dynamic device insertion/removal support for WfM 2.0 compliance.
• Adds DMI web agents.
• Includes SMS PDF file on disk 1.

SOFTPAQ NUMBER: SP11646
PART NUMBER:  N/A 
FILE NAME: N/A
TITLE:  Compaq Management Agents for Desktops and Workstations

VERSION: 4.36 Revision B

LANGUAGE: Korean

CATEGORY: Software Solutions

DIVISIONS: Commercial Desktops,Workstations

PRODUCTS AFFECTED: 
Deskpro: 590,575,5166,5150,5133,5120,5100,466,450,4100
Deskpro 4000: 6200,6180
Deskpro 6000: 6200,6180
Deskpro 2000: 5200,5166,5133,5120,5100
Deskpro 2000: 6200,6180
Deskpro 4000: 5200,5166,5133,5120,5100
Deskpro 6000: 5200,5166
Deskpro 2000: 5233MMX,5200MMX,5166MMX
Deskpro 4000: 5233MMX,5200X,5200MMX,5166X,5166MMX
Deskpro 4000: 6333,6300MMX,6266MMX,6233X,6233MMX
Deskpro 6000: 6333,6300MMX,6266X,6266MMX,6233X,6233MMX
Deskpro 2000: 6300MMX,6266MMX,6233MMX
Deskpro 4000S: 5233MMX,5200MMX,5166MMX
Deskpro 4000N: 5233MMX,5200MMX,5166MMX
Deskpro EN Series SFF: P600,P550,6500,6450+,6450,6400,6350,6333C,6333,
6300C,6300A,6300
Deskpro EN Series: P600,P550,6500,6450+,6450,6400C,6400,6350,6333C,6333,
6300C,6300A,6300,6266
Deskpro EP Series: P600,P550,6500,6450+,6450,6400C,6400,6350,6300A,6300,
6266C,6266
Deskpro SB Series: 6400,6350,6300,6266
Deskpro EN Series SFF: Net PC 6400,Net PC 6300
Deskpro EP Series: 6333C,6333
Deskpro SB Series: 6333
Deskpro EN Series: C500/810,C466/810
Deskpro EP Series: C500/810,C466/810
Deskpro EN Series SFF: C500/810,C466/810
Deskpro EP Series: P500/810e,P450+/810e
Deskpro EN Series SFF: P500/810e,P450+/810e
Professional Workstation: Model AP200
Professional Workstation: Model AP500,Model AP400
Professional Workstation: Model SP700

OPERATING SYSTEM: 
Microsoft Windows 95 
Microsoft Windows 98 
Microsoft Windows NT Workstation 4.0 

SYSTEM CONFIGURATION:  N/A

PREREQUISITES: 
*Microsoft Windows Socket2 Update for Windows 95 is recommended.
*TCP/IP Protocol must be installed to be remotely managed.
*Microsoft IE4.01 or later is required for local web management.
*Microsoft SNMP is required to be managed via SNMP.

EFFECTIVE DATE:  September 24, 1999 

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SOFTPAQ UTILITY VERSION: 4.0

SUPERSEDES: SP10888

DESCRIPTION:
This software provides local alerting, DMI, SNMP, and DMI web agents for 
Compaq Desktop Systems that support Intelligent Manageability running 
either Windows 95/98 or Windows NT. 

Local alerting notifies the user if the system temperature has been 
exceeded under normal operating conditions or if an imminent drive failure
has been detected. SNMP agents allow the system to be managed by 
SNMP-compliant management applications such as Compaq Insight Manager. 

Desktop Management Interface (DMI) support allows the computer to be 
managed by DMI-compliant management applications. 

DMI Web agents allow the computer to be managed both locally and remotely 
by a web browser (Internet Explorer 4.01 or later).


ENHANCEMENTS/FIXES: 
*Provides the ability to disable trap editing on the SNMP status screen.
*Provides the ability to hide the taskbar icon
*Integrates with Compaq's System Software Manager(SSM).
*Adds support for Intel's processor serial number.
*Adds support for reporting USB hard drive, NIC, keyboard, and mouse 
devices.
*Adds dynamic device insertion/removal support for WfM 2.0 compliance.
*Adds DMI web agents.
*Includes SMS PDF file on disk 1.

*-  Fixes problem where files are installed to non-translated "Program 
Files" directory for non-English operating systems.
*-  Fixes problem where Ultra Wide SCSI devices with SCSI ID greater than 
7 were not being reported.
*-  Fixes Windows 9x hang when Diagnostics is run before 3 minutes after 
initial boot.
*-  Fixes intermittent DMI initialization problem that causes the system 
to appear as not manageable.


HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions.

3. After the files have been unpacked, you may delete the self-extracting
file downloaded in step 1.

4. To install, read and follow the instructions provided with the software.

5. To create (optional) installation (or other deliverable) diskette(s) 
run MAKEDISK.BAT and follow the on-screen instructions. 
MAKEDISK.BAT is included only if installation diskette(s) creation is an option.

6. After the installation is completed, you may delete the directory
created in step 2 if you wish.

   Copyright 1995-1999, Compaq Computer Corporation. All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.