SOFTPAQ NUMBER:  SP11521
PART NUMBER:  380929-003 
FILE NAME:  N/A
TITLE:  ROMPaq for Compaq Prosignia Desktop 310 Series (686T8 ROM)
VERSION:  686T8_080599 
LANGUAGE:  English

CATEGORY:  ROMPaqs 

DIVISIONS:  Desktops

PRODUCTS AFFECTED:  Compaq Prosignia Desktop 310 Series model 6300A, 6333, 6366C,
                    and 6400C with a 686T8 Family ROM
             NOTE:  Run F10 Setup to determine the ROM Family and ROM date.

OPERATING SYSTEM:  N/A 

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:   January 20, 2000

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  SP9959

DESCRIPTION:  This creates a ROMPaq firmware diskette that can be used to 
restore or upgrade the System ROM to the 08/05/99 version in Compaq Prosignia 
Desktop 310 Series models mentioned above, when they have a 686T8 Family ROM.  
The ROM Family and ROM date can be determined by running F10 Setup.  

This ROM version is compatible for use with Windows 2000.

Enhancements/Fixes:

- Features new patches for the Pentium II and Pentium III processors.
- Features a new F10-Setup option "WOL Boot Source" under "Advanced -> Power-On Self Test".
  This allows users to automatically boot to a remote server when the system recieves a
  "magic packet" wakeup signal.
- Features a three second improvement in POST time.
- Adds the ability for new PCI devices with large option ROM's to co-exist without conflict.
- Corrects a condition with the Adaptec AHA-3960D SCSI controller card that was causing the 
  system to lock up at startup.
- Corrects a condition with the Microsoft Natural Elite keyboard that was causing the F11 
  and F12 keys to not work.
- Corrects a potential slow boot issue with SCO UNIX version 5.0.5.
- Corrects a condition with the Syquest SyJet 1.5GB IDE removable media device not 
  being seen properly.
- Corrects a condition where the computer may lock up when using the "ON Command" remote
  software.
- Added an AGP disable on warm boots for some cards that required a reset.

HOW TO USE:

1. Obtain a formatted 1.44-MB diskette.

2. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskette in a drive to create the diskette.

4. After the diskette has been created, you may delete the  
SoftPaq file downloaded in step 2.

5. Keeping the newly created diskette in the A: drive, cycle 
system power to boot from the ROMPaq diskette.

6. Follow the on-screen instructions to select the 08/05/99 
Compaq System ROM or the Language Module option and upgrade the firmware.

Copyright 1999, 2000 Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies.