PaqPlace   For your Compaq Compaq SoftPaq Driver & Software Archive
Home | Servers | Desktops | Notebooks | Workstations | Other | All SoftPaqs
Home > All SoftPaqs > SP11375

SP11375 — Armada 7300/7700 ROMPaq Upgrade Diskette (03 June 1999)

SoftPaq Number SP11375
Filename sp11375.exe
Size 800K
Date August 11, 1999
Version 586S_0603.99
Operating System OS/2, Windows 3.x, DOS, Windows 95, Windows 98, Windows NT 3.5 Wkst, Windows NT 4.0 Wkst, Windows 2000
Products Affected Compaq Armada 7300 Series Compaq Armada 7700 Series
Supersedes SP7575 (13 May 1998 ROM)

  Download sp11375.exe  


Readme

SOFTPAQ NUMBER:  SP11375
PART NUMBER:  272460-409
FILE NAME:  N/A
TITLE:  Armada 7300/7700 ROMPaq Upgrade Diskette (03 June 1999) 
VERSION:  586S_0603.99 
LANGUAGE:  US English

CATEGORY:  ROMPaqs

DIVISIONS:  Portables

PRODUCTS AFFECTED:  Compaq Armada 7300 Series
		    Compaq Armada 7700 Series

OPERATING SYSTEM:  IBM OS/2
		   Microsoft Windows 3.x and MS-DOS
		   Microsoft Windows 95
		   Microsoft Windows 98
		   Microsoft Windows NT Workstation 3.5
		   Microsoft Windows NT Workstation 4.0
		   Microsoft Windows 2000

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  August 11, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  4.0

SUPERSEDES:  SP7575 (13 May 1998 ROM)

DESCRIPTION:  Creates a ROMpaq diskette to upgrade the System ROM in 
Armada 7300 and 7700 Series notebooks to the 06/03/99 version.

Enhancements/Fixes:  

- Resolves intermittent lockups that occur when Compaq Insight Management 
  Agents are installed.
- Y2K update to correct issue associated to Daylight Savings Time.
- Corrects a hard lockup condition that occurs when hot docking the 
  notebook 2 or more hard drives installed.

This version includes the following enhancements that were also 
implemented in previous ROM versions dated 09/18/97, 11/01/97, 12/16/97,
02/09/98, 03/20/98 and 05/13/98:

- Resolves PCMCIA Reboot issue.
- Resolves Madge NIC Standby issue.
- Resolves possible hang of system in Post with multiboot on if hard 
  drive bay is empty.
- Provides enhancements to help prevent battery damage when battery is
  at very low capacity.
- Resolves problem experienced when using 8GB hard drive
- Resolves noise problem during audio playback after resuming from 
  Suspend mode to RAM/disk in Windows NT or Windows 3.1.
- Resolves problem where diskette drive loses functionality under 
  certain conditions when docked in the MiniStation.
- Resolves problem where system will not boot from diskette if the 
  diskette is inserted after a "non-system disk" message has already 
  appeared because the hard drive bay is empty.
- Updates the century byte to meet requirements of "Year 2000 Compliance 
  Test Program" version 97.12.04.
- Resolves problem where keyboard password is bypassed when powering 
  on and booting from a diskette, even though power-on password 
  and Enable Keyboard Lock are both enabled.
- Resolves problem where system locks up while booting when an ISA 
  ATI graphics card is installed in the docking station.
- Increases battery life and resolves auxiliary battery charge issue.
- Resolves issue of losing video after installation of retail Microsoft
  Windows 95 from CD.
- Provides installation fix for 3Com and IBM PCMCIA network cards.
- Fixes vertical wave distortion problem seen in some external monitors.
- Fixes problem of losing video (black screen) if the system is left idle 
  for long periods.
- Prevents the key combination Fn-F4 from turning off the LCD panel if an 
  external CRT monitor is not present.
- Supports -3 & -4 266MHz CPU Module.
- Resolves switching battery in standby.
- Resolves a memory refresh issue.

HOW TO USE:

1.  Obtain a formatted 1.44-MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is an executable with 
a filename based on the SoftPaq Number above.

3.  From that drive and directory, execute the downloaded file 
and follow the on-screen instructions.  You will be prompted to 
insert the formatted diskette in a drive to create the diskette.

4.  After the diskette has been created, you may delete the  
SoftPaq file downloaded in step 2.

5.  Power down the computer.

6.  Place the newly created Compaq Armada 7300/7700 ROMpaq Diskette in 
Drive A: and power up the computer. Follow the instructions on the 
screen to upgrade the System ROM.

IMPORTANT: DO NOT TURN OFF POWER TO THE SYSTEM WHILE PERFORMING 
THIS PROCEDURE!

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies




PaqPlace — Compaq SoftPaq driver and software preservation archive. Not affiliated with Compaq or Hewlett-Packard.
Compaq and SoftPaq are trademarks of Hewlett-Packard Development Company, L.P.
All software provided as-is. Use at your own risk.
Home